Bosch GSM 509 Spezifikationen PDF herunterladen

SS2 SS3

SS1 SS2 SS3

SS1

PSTN (Contact ID) over GSM Mode

(+)

(-)

ITS-DX4020-G

DS7200V2 Series

DS7400XiV4

Easy Series

FPD-7024

GV3 Series

2113-12-5164

MODELO: ITS-DX4020-G

( 01)07891009538471

www.boschsecuritysystems.com

2012.10

F01U274446-02 en

Quick Start Guide

For complete installation, conﬁ guration, and testing instructions,

refer to the Conettix ITS-DX4020-G Installation and Operation

Guide (P/N: F01U133268) provided on the supplied CD-ROM.

Disconnect the Power

Before installing the ITS-DX4020-G, disconnect

all power to the control panel (AC and standby

battery).

Insert the SIM Card

1. Open the SIM card holder.

2. Insert the SIM card into the card guide.

3. Close the SIM card holder.

Mount the ITS-DX4020-G

1. Mount the ITS-DX4020-G on the control panel

enclosure using the supplied mounting screws.

Use any of the standard three-hole mounting

patterns on the control panel enclosure. If

necessary, remove the three mounting knockouts.

2. Mount the magnetic antenna to a metallic surface.

3. Connect the antenna cable to the threaded

ANTENNA connector on the ITS-DX4020-G.

Connect to the Control Panel

Connect the ITS-DX4020-G to the control panel as shown below.

• Dual Wireless Mode (IP over GPRS and Contact ID over GSM): Easy Series

• IP over GPRS Mode: All compatible control panels

• PSTN (Contact ID) over GSM: DS7200V2, DS7400XiV4, Easy Series, FPD-7024, GV3 Series, GV4 Series, ICP-CMS8-

CHI, ICP-CMS6-CHI

Apply Power

Connect power to the system (AC and standby battery).

Check Signal Strength

Check the signal strength LEDs (SS1, SS2, and SS3).

• If signal strength is acceptable, you are ready to conﬁ gure the ITS-DX4020-G.

• If signal strength is unacceptable, check the site for possible causes of signal interference.

NOTE: Depending on the SIM card used, ﬁ rst-time registration might take up to 3 minutes to complete. When the SIM

card registration is complete, the signal strength LEDs will light.

Conettix ITS-DX4020-G

GPRS/GSM IP Communicator

Control Panel Compatibility

DS7200V2 Series Version 2.10 or later

DS7400XiV4 Version 4.10 or later

FPD-7024 All versions

Easy Series Version 3.0 or later

GV2 Series D9412GV2, D7412GV2, D7212GV2

GV3 Series D9412GV3, D7412GV3, D7212GV3

GV4 Series D9412GV4, D7412GV4, D7212GV4

ICP-CMS6-CHI

ICP-CMS8-CHI

NOTE: For Dual Wireless Mode, use the PSTN (Contact ID) over GSM Mode ﬁ gure, but include all four data bus wires.

DS7200V2 Series

DS7400XiV4

Easy Series

FPD-7024

GV2 Series

GV3 Series

GV4 Series

ICP-CMS6-CHI

ICP-CMS8-CH

DS7200V2 Series

DS7400XiV4

Easy Series

FPD-7024

GV3 Series

GV4 Series

Certiﬁ cations

ANATEL No. 2113-12-5164

Australia A-Tick Approved

CE - EN60950 Safety

- EN50130-4 Electromagnetic Compatability

- EN55022 Radiated/Conducted Emissions

INCERT No. B-509-0005/d

Norwegian FGI: T-127/09, ATS4, grade 3

1 2

Inhaltsverzeichnis

Seite 1 - Conettix ITS-DX4020-G

122445566SS2 SS3SS1 SS2 SS3SS1 SS2 SS3SS1 SS2 SS3SS1 SS2 SS3=====SS1PSTN (Contact ID) over GSM ModeBGRYRRHTTH(+)(-)ITS-DX4020-GDS7200V2 SeriesDS7400Xi

Seite 2 - Technical Speciﬁ cations

Weitere Dokumente für Mobiltelefone Bosch GSM 509

Um das Dokument anzuzeigen Bosch GSM 509 Bedienungsanleitung

Bosch GSM 509 Bedienungsanleitung (22 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch GSM 509 Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Mobiltelefone Bosch GSM 509 herunter. Bosch GSM 509 Specifications Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Mobiltelefone Bosch GSM 509

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Bosch GSM 509