Bosch PIL975N14E Bedienerhandbuch Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
11
Accessing the basic settings
The hob should be switched off.
1. Turn on the hob with the main switch.
2. In the next 10 seconds, hold down the 0 symbol for 4
seconds.
™‚ is displayed on the left of the screen and on the right.
3. Press the 0 symbol until the indicator for the required
function is displayed.
4. Next select the setting required with symbols 0 to 9.
5. Press the 0 symbol for 4 seconds.
The settings will have been properly saved.
Leaving the basic settings
Turn off the hob with the main switch.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
heavy-duty cleaners, like oven sprays and stain removers
Pads that may scratch
High-pressure or steam cleaners
Glass scraper
Remove dried-on food remains using a glass scraper.
1. Release the scraper safety catch
2. Use the blade to clean the hob surface
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
™ˆ
Power-Management function
= Deactivated.*
= 1,000 W. minimum power.
= 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the hob.
™Š
Hotplate time selection
Unlimited: the last hotplate programmed remains selected.*
Limited: The hotplate will only remain selected for 10 seconds.
™‹
Return to basic settings
Personal settings.*
Return to factory settings.
Indicator Function
*Factory settings
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare