Bosch HCP30E51UC Bedienungsanleitung PDF herunterladen (Seite 9)

Fan back flow

The run-on time is ten minutes and cannot be changed.

Select ventilator setting.

Press "Timer" button for 3 seconds.

Once this time has elapsed, the ventilation and lighting

switch off automatically. The display shows the message

"End."

The ventilator run-on can be interrupted at any time by

pressing one of the buttons.

Audible signal

Switching on audible signal

Press and hold the "Light" button for 5 seconds.

An audible signal sounds and "Snd" appears on the

display panel for 3 seconds.

Switching off audible signal

Press and hold the "Light" button for 5 seconds.

"Snd" appears on the display panel for 3 seconds.

Overheating protection

The appliance is equipped with overheating protection. If

high temperatures are measured on the appliance, the

appliance switches automatically to the highest ventilator

setting until the temperature drops again.

If the hood is switched on, the highest ventilator setting

is set. If the temperature drops again, the appliance

switches back to the previously-selected ventilator

setting.

If the hood is switched off, the appliance switches

automatically to the highest ventilator setting. If the

temperature drops again, the appliance switches off

automatically.

While the overheating protection is active, "Auto"

appears on the display panel. The ventilator setting

cannot be reduced in this time.

Cleaning and maintenance

WARNING

To avoid risk of fire and explosion do not use

flammable liquids or solvents. Always unplug or

disconnect the appliance from the power supply

before servicing.

Do not use steam cleaners to clean the appliance.

Hidden surfaces may have sharp edges. Use caution

when reaching behind or under appliance.

WARNING

RISK OF BURNS

The appliance will become hot when in use,

especially in the area surrounding the bulbs. Let

cool before cleaning.

WARNING

RISK OF ELECTRIC SHOCK

Penetrating damp can cause electric shock. Only

clean appliance with a damp cloth. Prior to cleaning,

pull the plug or flip the breaker in the fusebox.

Cleaning agents

To prevent various surfaces from becoming damaged

due to incorrect cleaning agents, follow the specifications

given in the table. Do not use

cleaning agents that are harsh or scouring,

cleaning agents with high alcohol content,

hard scouring pads or sponges,

high-pressure cleaners or steam cleaners.

Thoroughly rinse all new sponges before use.

Observe all instructions and warnings accompanying

cleaning agents.

Area Cleaning agents

Stainless steel Warm soapy water:

Clean with a dish rag and dry with

a soft towel.

Only clean stainless steel with the

grain.

Specific products for stainless

steel care are available from

customer service or from special-

ized retailers. Apply a thin layer of

the care product with a soft cloth.

Varnished

surfaces

Warm soapy water:

Clean with a damp dish rag and

dry with a soft towel.

Do not use stainless steel

cleaner.

Aluminum and

plastic

Glass cleaner:

Clean with a soft cloth.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch HCP30E51UC Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hauben Bosch HCP30E51UC