Bosch UML-202 Bedienerhandbuch Seite 32

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 38
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 31
UML-202-90 TroubleShooting Guide | en 27
Bosch Security Systems, Inc. Instruction Manual F01U076723 | 1.0 | 2007.09
9 TroubleShooting Guide
Problem Solution
No image is displayed on
screen
1. Check that the power cord of the monitor is securely con-
nected into the wall outlet or grounded extension cable or
strip.
2. Power switch should be in the ON position and the LED lit.
3. Check that the Brightness and/or Contrast adjustments of the
display have not been turned down to minimum levels.
“Going to Sleep” mes-
sage is displayed
1. The signal cable should be completely connected to the video
card/computer.
2. The video card should be completely seated in its slot and the
computer switched ON.
Display image is not cen-
tered, is too small, or too
large in the PC mode
Push the down key to activate the Autoset function.
-or-
Adjust the Clock and Phase in the OSD submenu.
Vertical or horizontal
noise is present in the
picture
Push the down key to activate the Autoset function (for VGA inputs
only).
-or-
Adjust the Clock and Phase in the OSD submenu.
Incorrect colors 1. Press the Menu button on the front panel of the monitor, then
press the right arrow to select the Color menu. Press the
down arrow on the front panel and select Cool, Warm, or Nor-
mal.
- or -
2. Press the Menu button on the front panel of the monitor, then
press the right arrow to select the Utility menu. Press the
down arrow on the front panel and select Recall to reset to
the default settings.
The error message “Out
of Range” is displayed
PC is operating with either a resolution or timing mode that is not
supported by the UML-202-90. Change the PC timing mode to one
of the valid combinations below:
640 x 480; 60/72/75 Hz
800 x 600; 60/72/75 Hz
1024 x 768; 60/70/75 Hz
1280 x 1024; 60/75 Hz
1600 x 1200; 60 Hz
Seitenansicht 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare