Bosch LTC 8500 Bedienerhandbuch PDF herunterladen (Seite 31)

Satellite Site “Trunk Line” Monitor Outputs

EN | 21

9Satellite Configuration Installations

Due to the many variations possible, only general guidelines can be covered for

installing satellite systems. Refer to the Appendix Section of this manual, the

LTC 8850/00 GUI Software manual, or the LTC 8059/00 MCS package manual for

additional configuration and programming information on satellite systems.

Figure 6: Satellite Concept Configuration

9.1 Satellite Site “Trunk Line” Monitor Outputs

At each of the remote satellite sites, a desired number of monitor outputs from the

switcher must be assigned as trunk lines. The number of trunk lines can range from

1 to the maximum number of monitor outputs provided by the switcher. Note that

the number of trunk lines coming from a satellite site determines the maximum

number of cameras from that site which may be viewed simultaneously at the main

site. If operators will be stationed at the satellite site, they should be prevented from

accessing the monitor outputs designated as trunk lines. This prevention can be

accomplished via the Monitor Lockout Tables in either the LTC 8059/00 MCS or

the LTC 8850/00 GUI Software (see below).

Central

Control

Station

Satellite

System

Satellite

System

Satellite

System

Satellite

System

Satellite

System

Satellite

System

Data

The central station can view/control cameras

located at any site. The satellite sites can view/

control cameras located only within their own

site.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 103 104

Keine Kommentare

Bosch LTC 8500 Bedienerhandbuch Seite 31