Bosch GPL 3 Professional Bedienungsanleitung PDF herunterladen (Seite 10)

10 | English

1 609 929 S08 | (13.3.12) Bosch Power Tools

f Do not subject the measuring tool to extreme tempera-

tures or variations in temperature. As an example, do

not leave it in vehicles for long time. In case of large varia-

tions in temperature, allow the measuring tool to adjust to

the ambient temperature before putting it into operation.

In case of extreme temperatures or variations in tempera-

ture, the accuracy of the measuring tool can be impaired.

f Avoid heavy impact or falling of the measuring tool. Af-

ter heavy exterior impact on the measuring tool, an accura-

cy check should always be carried out before continuing to

work (see “Levelling Accuracy”).

f Switch the measuring tool off during transport. When

switching off, the levelling unit, which can be damaged in

case of intense movement, is locked.

Switching On and Off

To switch on the measuring tool, push the On/Off switch 4

upward so that “I” is indicated on the switch. Immediately af-

ter switching on, the measuring tool sends a laser beam out of

each exit opening 1.

f Do not point the laser beam at persons or animals and

do not look into the laser beam yourself, not even from

a large distance.

To switch off the measuring tool, push the On/Off switch 4

downward so that “0” is indicated on the switch. When

switching off, the levelling unit is locked.

Setting the Automatic Switch-off

By default, the measuring tool automatically shuts off

20 minutes after being switched on.

The automatic switch-off can be set from 20 minutes to

8 hours. For this, switch the measuring tool on, then immedi-

ately off, and then on again within 4 s. To confirm the change,

all laser beams will flash quickly for 2 s after switching on the

second time.

f Do not leave the switched on measuring tool unattend-

ed and switch the measuring tool off after use. Other

persons could be blinded by the laser beam.

When switching on the measuring tool the next time, the auto-

matic switch-off is set to 20 minutes again.

Working with Automatic Levelling

Position the measuring tool on a level and firm support, attach

it to the holder 8 or to the tripod 18.

After switching on, the automatic levelling function automati-

cally compensates irregularities within the self-levelling range

from ± 5° (longitudinal axis) and ± 3° (lateral axis). The level-

ling is finished as soon as the laser points do not move any

more.

If the automatic levelling function is not possible, e.g. be-

cause the surface on which the measuring tool stands devi-

ates by more than 5 ° or 3 ° from the horizontal plane, the laser

beams flash rapidly. In this case, bring the measuring tool to

the level position and wait for the self-levelling to take place.

As soon as the measuring tool is within the self-levelling range

of ± 5° or ±3° respectively, all laser beams light up continu-

ously again.

In case of ground vibrations or position changes during

operation, the measuring tool is automatically levelled in

again. To avoid errors by moving the measuring tool, check

the position of the laser beams with regard to the reference

points upon re-levelling.

Levelling Accuracy

Influences on Accuracy

The ambient temperature has the greatest influence. Espe-

cially temperature differences occurring from the ground up-

ward can divert the laser beam.

As thermal fluctuation is largest close to the ground, the

measuring tool, if possible, should be mounted on a commer-

cially available tripod and placed in the centre of the working

area.

Apart from exterior influences, device-specific influences

(such as heavy impact or falling down) can lead to deviations.

Therefore, check the accuracy of the measuring tool each

time before starting your work.

Should the measuring tool exceed the maximum deviation

during one of the tests, please have it repaired by a Bosch af-

ter-sales service.

Checking the Horizontal Levelling Accuracy

A free measuring distance of 20 m on a firm surface between

two walls A and B is required for the check.

– Mount the measuring tool onto the holder or a tripod, or

place it on a firm and level surface close to wall A. Switch

the measuring tool on.

– Direct the horizontal laser beam against the close wall A

and allow the measuring tool to level in. Mark the centre of

the laser beam on the wall (point I).

– Turn the measuring tool around by 180°, allow it to level in

and mark the centre point of the laser beam on the oppo-

site wall B (point II).

20 m

180˚

OBJ_BUCH-807-003.book Page 10 Tuesday, March 13, 2012 9:26 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 157 158

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch GPL 3 Professional Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Bosch GPL 3 Professional