Bosch 4412 Bedienungsanleitung PDF herunterladen (Seite 4)

D6412/D4412

SIA Installation Quick Reference Guide

D6412/D4412 SIA Installation Quick Reference Guide

5.1.2 Abort Window

The Abort Window is the time the end user has to acknowledge an alarm and effectively abort the panel’s alarm response.

The Abort Window is programmable.

• The minimum duration is 15 sec.

• The maximum is 45 sec.

• The default is 30 sec.

In accordance with UL standards, the SIA standard intends that the combined Entry Time and Abort

Window will not be programmed to exceed 1 min.

D6412/D4412 Program Entry Guide Reference

Global Point Configuration: The Alarm Event Abort Window sets the duration of the window (15, 30, or 45 sec.). The

default is 30 sec.

5.1.3 Passcode Acknowledges Alarm

When the panel is sounding an alarm, enter a valid passcode to silence the alarm. Entering the first digit of the code

silences the alarm temporarily. If a valid passcode is not entered, the alarm begins sounding again after a period of about

10 sec. passes with no keypad activity.

5.1.4 Alarms Acknowledged within the Abort Window

If the end user acknowledges an alarm within the Abort Window:

• The alarm output is silenced.

• No alarm, restoral, or cancel reports are sent.

• A “three beep tone” sounds at the command center indicating that the alarm event was aborted.

5.1.5 At the End of the Alarm Abort Window

If no user acknowledges the alarm within the Alarm Abort Window, the panel sends the appropriate alarm reports.

5.2 Cancel Report

If a user acknowledges an alarm after the Abort Window expires, but before Bell Time expires, the panel sends a Cancel

Report.

D6412/D4412 Program Entry Guide Reference

Global Reporting Options: The Cancel Event Enabled parameter enables/disables the Cancel Event. The Cancel Event

Enabled feature is enabled by default.

1 2 3 4 5 6 7 8

Keine Kommentare

Bosch 4412 Bedienungsanleitung Seite 4