Bosch DIVAR AN 5000 Bedienungsanleitung PDF herunterladen (Seite 92)

– Record, page 70

PTZ

Figure 7.9: PTZ control

To swivel the camera view, click on any of the eight direction arrows on the left of the screen

Use this menu to also setup the following PTZ properties:

– Speed: adjust the speed of the camera movements (value ranges from 1 to 8).

– Zoom

– Focus

– Iris

Click on icons

and to increase or reduce the zoom, focus and iris

The other buttons on the bottom of the screen are used to assign and activate a set of

movements for the camera as follows:

1. Enter a number (from 1 to 999) in the right field (this will be the ID for the preset PTZ

movements for the camera).

2. Use the eight direction arrows to swivel the camera to a desired position.

3. Click <Set> to assign the final position to the ID.

4. You will be asked to save the preset (use the focus

button to save). This preset can be

eventually added to the PTZ activation sequence if an alarm is detected – see Detect, page

57.

5. If required press <Shot> to move the camera immediately to a preset ID position.

The Aux buttons are used when activating an ID for special processes stored in the camera

– Aux On: refer to your camera manual for the Aux definition.

– Aux Off: switch off the special Aux definition

Sequence

Setup the camera sequence and interval times in the following configuration screens:

– For monitor A - see Tour setup, page 64

– For monitor B – see Sequence Mon B, page 79

7.2.2

7.2.3

92 en | Operating instructions DIVAR AN 3000 / DIVAR AN 5000

2013.11 | 1.1 | AM18-Q0669 Operator Manual Bosch Security Systems

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 161 162

Keine Kommentare

Bosch DIVAR AN 5000 Bedienungsanleitung Seite 92