Bosch Divar Easy Installationshandbuch PDF herunterladen (Seite 49)

Bosch Security Systems

Divar - Easy | Installation Manual | Menu system EN | 5-9

>> HISTORY LOG SETUP

•Select Yes for those events that you want to log in the history file.

• The entire history list is erased if you select the Clear History item.

• Date/time changes of stored video are always logged and cannot be

disabled or cleared.

>> LOCAL PASSWORDS

• Set or change the password that allows access to playback functions.

• Set or change the password that allows access to the configuration

functions.

• Use the camera keys (1 to 9) on the front of the unit to enter a four-digit

password in the dialog box that appears.

• Enter the same password again to have it verified.

• Press F2 to remove password protection.

>> CONNECTIVITY

The Connectivity menu gives access to settings that control the behavior of the

unit with respect to all external devices or a network. It also gives access to

settings for connecting computers via the communications port.

>>> Network setup

• Set DHCP to Yes to have IP address, subnet mask and default

gateway assigned automatically by the network server. The actual

values are displayed.

• Enter a Divar name to be used in the network.

• Fill in the IP, subnet mask and default gateway addresses when

DHCP is set to No. If required, change the default http port (80) to

a new value. The MAC address is read only.

•If Discovery is set to Enabled, the Control Center can carry out

automatic discovery and read the IP address of the unit.

• Restrict the network bandwidth by entering an Mbps between 0

and 100 for the bandwidth limit.

>>> Network access

• Access to the unit via the network can be set for up to two different

users.

• Restrict access to the unit by listing an IP address range. The range

you use will normally depend on your network setup.

• The administrator is user 1 and is identified as

ADMINISTRATOR.

IP Range

• Eight IP ranges can be entered to allow access.

• Enter the same begin and end address to specify a single IP address.

Enter different begin and end addresses to specify an IP address

range.

• Use the up/down arrow keys to move to an IP entry. Press the select

key to edit the entries. Press F1 to set the default values

(000.000.000.000 to 255.255.255.255).

Users

• Enter a name, up to 16-characters long, for each user. Enter a

password up to 12-digits long.

• Set User Rights to Live to restrict viewing rights to live video only.

• Select the cameras in the Camera Lock Out submenu that are not

accessible for the user.

• Set the camera sequence dwell time (from 3 to 59 seconds) for the

remote viewer.

• Set Camera Control to allow control of controllable cameras

remotely.

>>> COM port

• The COM port is an RS232 serial port used mainly for connecting

a PC to the unit.

• Most parameters are fixed. Select the appropriate baud rate.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch Divar Easy Installationshandbuch Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) Bosch Divar Easy