Bosch 7000 Series Installationshandbuch PDF herunterladen (Seite 31)

DINION capture 5000/7000 Configuration | en 31

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01

4.1.3 Menu Navigation Keys

Five keys are used for navigating through menu system.

– Use the up or down keys to scroll through a menu.

– Use the left or right keys to move through options or to set

parameters.

– When in a menu, quickly double-press the menu/select key

to restore the selected item to its factory default.

– To close all menus at once hold down the menu/select key

until the menu display disappears or continually select the

Exit item.

Some menus automatically close after about two minutes; other

menus have to be closed manually.

4.2 Pre-Defined Modes

There are six operating modes settings to make configuration

easier. In the license plate camera, Normal and FullSun modes

are pre-programmed to work with Automatic Mode Switching.

Any one of the six modes can be selected as the "switch-to"

mode in Automatic Mode Switching, refer to Section 4.6.3 Alarm

I/O submenu, page 47. The modes are defined as follows;

1. Normal (Mode 1)

Default installation mode to provide stable pictures over a

24-hour period. These settings are optimized for out-of-

the-box installation.

2. FullSun (Mode 2)

Reduced gain to provide properly exposed image during

bright conditions.

3. Mode 3

Default settings.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Keine Kommentare

Bosch 7000 Series Installationshandbuch Seite 31