Bosch APC-AMC2-4WCF Installationshandbuch PDF herunterladen (Seite 29)

AMC2 4W Installing | en 29

Bosch Security Systems Installation manual F.01U.024.965 | V.4 | 2006.09

Fig. 5.6 Location of the power supply connector

An external power supply (10 - 30V DC) must be connected for

internal electronics at pin 1 (positive) and pin 3 (negative) of

the pluggable screw connector.

When using a shared 12V DC power supply for internal electron-

ics and peripherals, pin 1 and pin 6 resp. pin 3 and pin 7 can be

shortened.

If an uninterruptible power supply (UPS) is used, the relay out-

put for power good signals from the UPS is connected to the

following pins:

• pin 4 and 7 for power good AC

• pin 5 and 7 for power good Battery

• pin 6 and 7 for power good DC

Otherwise these pins must be short-circuited.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Keine Kommentare

Bosch APC-AMC2-4WCF Installationshandbuch Seite 29