Bosch LTC 8714 Bedienungsanleitung PDF herunterladen (Seite 4)

LTC 8770 Series Relay Units

The LTC 8770 Series are relay units that are designed to

operate with devices that generate Allegiant biphase control

code. These devices include the Allegiant series of video

matrix switcher/controllers, System4 series of multiplexers,

LTC 5136 controller series, Phoneline Video Transmission

Systems, Code Merger Series Units, and various Data

Converter Series Units. The LTC 8770 receives biphase

control signals and opens or closes relays, depending upon

the desired operating mode.There are 24 individually

isolated relays in which to connect to various devices and

there are six functional operating modes and one user test

mode to aid installation.

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8770/50 230 VAC, 50/60 Hz 198 to 264 8 W

LTC 8770/60 230 VAC, 50/60 Hz 105 to 132 8 W

Indicators: Power and data transmission activity displayed

using LEDs. Device number or logical relay number

indicated by a 4-position thumbwheel switch located on the

rear panel.

Connectors:

Inputs: One 3-pin removable screw terminal connector,

located on the rear panel; communication port where

biphase commands are received.

Outputs: Four 12-pin removable screw terminal connectors

located on the rear panel; relay contact (0.5 A at 20

VAC/DC and a maximum resistive load of 10 VA) 36

peak volts from either pin of the relay to ground.

AC Input: 3-wire power cord with grounded plug; 1.8 m

(6 ft) long.

Mechanical

Construction/Finish: Steel chassis with sheet metal cover

and plastic bezel. Charcoal colored case.

Dimensions: 223 W x 280 D x 40 H mm (8.77 x 11 x

1.59 in).

Weight: 1.9 kg (4.3 lb).

Optional Rack Mount Kit: LTC 9101/00.

LTC 8712 Series

CONSOLE Port Expanders

The LTC 8712 Series "expands" an Allegiant system's

CONSOLE port to permit up to 4 external computing

devices to communicate with the system via RS-232

protocol. Any computing device which can normally

communicate directly with an Allegiant via its RS-232

CONSOLE port can be used with these port expanders.

The external devices can consist of PCs running the

Allegiant system's Master Control Software package, the

Philips Graphical User Interface (GUI), access control

systems, LTC 8552/00 RS-232 keyboards, or other devices

utilizing the Allegiant system's Command Console Language

(CCL).The LTC 8712 Series can be used with the

LTC 8100, LTC 8200, LTC 8300, LTC 8600, LTC 8800, or

LTC 8900 Series systems containing CPU software version

6.5 or higher.

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8712/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8712/50 230 VAC, 50/60 Hz 198 to 264 10 W

Indicators: Power and data transmission activity displayed

using LEDs.

Connectors:

Inputs: One 9-pin connector; provides RS-232 interface to

Allegiant bay. Two meter (6 ft) interconnect cable to

main bay supplied.

Outputs: Four 9-pin connectors for RS-232 interface to up

to four external devices.

AC Input: 3-wire power cord with grounded plug; 1.8 m

(6 ft) long.

Mechanical

Construction/Finish: Steel chassis with sheet metal cover

and plastic bezel. Charcoal colored case.

Dimensions: 223 W x 280 D x 40 H mm (8.77 x 11 x

1.59 in).

Weight: 1.9 kg (4.3 lb).

Optional Rack Mount Kit: LTC 9101/00.

LTC 8713 Series Alarm Port Expander

The LTC 8713 Series interfaces to either a LTC 8560, LTC

8600, LTC 8800, or LTC 8900 Series alarm port to permit

additional LTC 8540/00 Alarm Interface units to be

connected to the system. A single LTC 8713 series alarm

port expander supports up to four LTC 8540/00 alarm

interface units.This provides the capability for up to 256

alarm input points. Multiple LTC 8713 units may be

combined to provide up to 1024 alarm input points using up

to sixteen LTC 8540/00 units.The actual number of units

that can be used in a system depends upon the model of

the Allegiant system being used. System interconnect cable

is included. A separate 12 V AC or DC, 5 watt power

supply is required for each LTC 8540/00.

Alarm Capacities

Allegiant Maximum No. Maximum No. Maximum No.

Model No. of Alarms of LTC 8713 of LTC 8540/00

LTC 8500 128 1 2

LTC 8600 512 3 8

LTC 8800 1024 5 16

LTC 8900 1024 5 16

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8713/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8713/50 230 VAC, 50/60 Hz 198 to 264 10 W

Indicators: Power and data transmission activity displayed

using LEDs.

Connectors:

Inputs: One 9-pin connector; provides RS-232 interface to

main Allegiant bay. Two meter (6 ft) interconnect cable

to main bay supplied.

Outputs: Four non-powered 9-pin connectors for RS-232

interface to up to four expanded LTC 8540/00 units.

Data cables supplied with LTC 8540/00 are used to

connect alarm interfaces to port expander. A separate

12 V AC or DC, 5 watt power supply is required for

each LTC 8540/00.

AC Input: 3-wire power cord with grounded plug; 1.8 m

(6 ft) long.

Mechanical

Construction/Finish: Steel chassis with sheet metal cover

and plastic bezel. Charcoal colored case.

Dimensions: 223 W x 280 D x 40 H mm (8.77 x 11 x

1.59 in).

Weight: 1.9 kg (4.3 lb).

Optional Rack Mount Kit: LTC 9101/00.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch LTC 8714 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch LTC 8714