Bosch Solution 144 Betriebsanweisung PDF herunterladen (Seite 39)

39Bosch Security Systems 04/12 BLCC600U

Solution 144 User Guide

Holiday Dates H1

Start 12am Stop 12am

01 Jan 01 Jan

Press

 OK to SAVE

3. Use the [] and [] keys to scroll the cursor left and

right between the holiday day and month. Use the

[] and [] keys to scroll the day and month.

4. Press [OK] to save and exit, or press [MENU] to exit

without saving.

System > System Options >

Keypad Hi/Lo Temp

MENU 7-7-3

The keypad Hi/Lo temperature option allows you to

program the minimum (0 °C) and maximum (50 °C)

temperatures the keypad will monitor (tolerance = +/- 2

°C).

If the temperature falls below the minimum temperature,

the keypad will display ‘Low Temp xxº’. If the temperature

increases above the maximum temperature, the keypad will

display ‘High temp xxº’. (xx = programmed temperature to

be monitored).

Enter programming mode (PIN + MENU) then,

1. Press [MENU] + [7] + [7] + [3].

The keypad will display the current temperature

settings.

Keypad Hi/Lo Temp

High Temp Low Temp

000 000

Press

 OK to SAVE

2. Use the [] and [] keys to program the ‘High’ and

‘Low’ temperatures. To toggle between the ‘High’

and ‘Low’ temperature, use the [] and [] keys

(Range = 0°C to 50°C).

3. Press [OK] to save and exit, or press [MENU] to exit

without saving.

System > System Testing >

Site Name

MENU 7-7-7

This menu allows the master user to program or modify

the site name. The site name can be used to name the

entire system rather than relying on area names alone.

eg. site name could be “Acme Plumbing”. When the email

reporting option has been enabled the site name will be

sent as the message subject line to help identify which

system has reported to the receiving party.

A maximum of 32 characters of text can be entered in this

eld. Use the [] and [] keys to scroll the cursor left and

right to view the entire name. The default site name is

“MyAlarm”

1. Enter your Master PIN + [MENU].

2. Enter [7] + [7] + [7] + [OK].

The keypad will display the current Site Name.

Site Name

MyAlarm

Press

 OK to SAVE

3. Using the numeric keys, enter the description of the

control panels site name. You can change a single

chanracter by scrolling the cursor left [] and right

[].

At any time you can use the [] and [] keys to scroll

through the complete list of available characters.

To clear all text from the cursor position to the right,

press the [OFF] key.

4. When the site name is complete, press [OK] to save

and exit, or press [MENU] to exit without saving.

System > System Testing >

Walk Test All Zones

MENU 7-9-0

This menu allows you to test all zones within an area at the

same time.

Enter programming mode (PIN + MENU) then,

1. Press [MENU] + [7] + [9] + [0].

If the system has more than 1 area then the keypad

will display a list of areas that are available to walk

test zones.

2. Use the [] and [] keys to select the area that you

want to do walk test, then press [OK] to select.

Alternatively, you can enter the area number, then

press [OK].

The keypad will scroll all zones that you can test.

To test zone Zn1

open then close

Zone 1 Name

Press OK or MENU

To test zone Zn2

open then close

Zone 1 Name

Press OK or MENU

3. Open and close each zone that needs to be tested.

A zone that has been successfully tested will no

longer scroll on the keypad display.

When all zones have been tested, the keypad will

display:

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch Solution 144 Betriebsanweisung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch Solution 144