Bosch VC7D1305T Spezifikationen PDF herunterladen (Seite 5)

Bosch Security Systems | 2003-08 | Version 2

EN | 5

VCM7D130/00T & VC7D1305T

| Installation Instructions

When you unpack the Dome camera, the physical default position of

the camera is that the top of the image is correspondant to the camera

'Bosch' logo side.

Before starting the installation, remove the tinted dome by pulling it

off and put it in a safe place to avoid stains and scratches

MOUNTING THE UNIT:

The unit has two cable entries for:

• Cables' route is through the surface like false ceiling or in a

wall (bottom entry)

• Cables' route is on the surface like concrete wall (side entry)

1. Open the mounting plate (1) by pushing the side tab (2b). You

can remove the mounting plate by unhooking from the tab (2a).

2. Using the mounting plate (1) as template, drill holes for camera

mount and cable entry as appropriate.

3. Connect the Dome camera to the system monitor.

4. Locate cable into the appropriate routing clip

5. Fit the camera onto the mounting plate, by hooking the clip (2a),

and then ensuring the tab (2b) clicks into it's location.

6. Connect the system monitor to the mains.

7. Switch on the mains power switch.

8. The monitor will check the system. After a short time the Dome

camera image will appear on the monitor screen.

9. If necessary adjust contrast /brightness and/or color (See the

View Settings menu of the monitor) to optimize the image on the

system monitor.

10. Adjust the viewing direction of the ball camera (3) and ensure

that the picture display on the monitor is level.

11. Click the tinted dome in place and if necessary clean its surface

with a soft cloth.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Bosch VC7D1305T Spezifikationen Seite 5