Bosch T20-UL Betriebsanleitung PDF herunterladen (Seite 29)

Problem Possible cause(s) Solution(s)

The Check drain indi- Drain hose is blocked. Check drain hose.

cator light up. ---> Maintenance of drain hose; Page 27

Water has not drained Check drain hose connection conditions.

completely.

Drain hose is leaking: is not Check the drain hose, be sure that it is on the dryer

screwed on the tight at both ends, securely with the clamp in place; may need to replace

or rubber not placed in hose. the drain hose if leaking continues.

Water is leaking out. Dryer is not leveled. Level the dryer.

---> Leveling the dryer; Page 14

The heat exchanger seal is dirty. Clean the heat exchanger seal.

--> Cleaning the heat exchanger; Page 26

Program terminates Ambient temperature greater than Ventilate the room.

shortly after starting. 41 °F/5°C.

Laundry is not loaded. Load the laundry.

---> Loading the laundry; Page 23

Load too small for selected pro- Use time program.

gram. ---> Program selection table; Page 18

Loaded laundry dry. Check the loaded laundry. If it is dry, open the door,

remove laundry and turn program selector to Off.

The door opens by The door not closed properly. Close the door until a click is heard.

itself.

Creasing. Laundry load exceeded. Do not exceed the maximum load for selected pro-

Unsuitable program selected, gram. Remove items of laundry immediately after the

end of the program, hang them up and pull into shape.

Turn program selector to Off.

--> Program selection table; Page 18

Drying result is not sat- Warm laundry may feel damper Remove items of laundry immediately after the end of

isfactory (laundry feels than it really is. the program and turn the program selector to Off.

too damp). The selected program does not suit Use another drying program or, in addition, select the

the load. time program.

---> Program selection table; Page 18

Dryness level is not adjusted. Use Dry Level to adjust the dryness level.

---> Dry Level; Page 19

Fine layer of limescale on the Clean the moisture sensors.

humidity sensors. ---> Cleaning the moisture sensors; Page 27

Program termination e.g. main See the problem(s) mentioned in this table.

power supply failure, door open or

maximum drying time reached.

Laundry is too wet. Spin laundry at higher speed in the washing machine,

before drying.

Switch off the dryer and switch on again.

Drying time too long. Lint filter is dirty. Clean lint filter.

---> Cleaning the lint filter; Page 25

Insufficient supply of air. Ensure that air can circulate.

Air inlet possibly blocked. Do not obstruct the air inlet on the front of the dryer.

Ambient temperature higher than Ventilate the room.

95°F/35°C.

Program does not start Program ending time has been Drying cycle will begin at proper time to complete at

Finished in (remaining) selected and activated, the selected Finished in time.

time is displayed.

Program does not start Childproof look is activated. Deactivate Childproof look.

- o= symbol light up. ---> Childproof lock; Page 24

1 2 ... 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch T20-UL Betriebsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wäschetrockner Bosch T20-UL