Bosch DDC KIT Installationsanleitung PDF herunterladen (Seite 9)

F00E900050 KTS 570 / ESI[tronic] INSTALLATION GUIDE

Firmware Update Error Message:

To perform the Firmware Update at a later time, click the red circle with the line through

it to bypass the Firmware Update and continue the software download:

When the ESI[tronic] software installation is complete an Installation was successful

window will appear.

12. Make sure that the Yes, restart computer now radio button is selected and click

Restart.

FIRMWARE UPDATE:

During the software installation ESI[tronic] will attempt to

update the firmware in the KTS 570. If the KTS 570 was connected to the PC via USB

as instructed previously, the Firmware Update will be successful. If a Firmware Update

Error Message appears, verify the KTS 570 is connected to the PC via USB and is

powered up (verify by blinking green light on end of unit). Click OK and click green check

mark if provided.

If you are unable to connect the KTS 570 at this time, you may process the Firmware

Update at a later time. Click the red circle with a line through it to bypass the Firmware

Update For instructions, go to the FIRMWARE UPDATE section later in this guide.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Keine Kommentare

Bosch DDC KIT Installationsanleitung Seite 9