Bosch DDC KIT Spezifikationen PDF herunterladen (Seite 4)

Robert Bosch LLC KTS 570 Quick Start Guide | F00E900073 | Version 1 | August 2007

KTS 570 Quick Start Guide | F00E900073 | Version 1 | August 2007 Robert Bosch LLC

Conrm that the proper components will be installed

to the correct drive on your PC and click Continue.

ESI]tronic] will now begin loading on your PC.

Depending on the speed of your computer and the

amount of data being transferred, loading times

will vary.

Firmware Update Error Message

To perform the Firmware Update at a later time, click

the red circle with the line through it to bypass the

Firmware Update and continue the software download:

When the ESI[tronic] software installation is complete

an Installation was successful window will appear.

Make sure that the Yes, restart computer now radio

button is selected and click Restart.

11.

12.

Step 2: Updating the ESI[tronic]

Software

To update the software, do the following:

Ensure the KTS 570 is connected to the PC via USB

and supply power to the KTS.

Insert the U (update) DVD into your DVD drive.

On the Bosch Applications Menu Double Click

Software Installation.

The Update – installation type window appears.

Note

During the software installation ESI[tronic]

will attempt to update the rmware in the KTS

570. If the KTS 570 was connected to the PC

via USB as instructed previously, the Firmware

Update will be successful. If a Firmware Update

Error Message appears, verify the KTS 570 is

connected to the PC via USB and is powered up

(verify by blinking green light on end of unit).

Click OK and click green check mark if provided.

If you are unable to connect the KTS 570 at this

time, you may process the Firmware Update

at a later time. Click the red circle with a line

through it to bypass the Firmware Update. For

instructions, go to the FIRMWARE UPDATE

section later in this guide.

Note

If your ESI[tronic] came with an update DVD

(it would be labeled U 200x/2, 200x/3, or

200x/4), it must be loaded at this time. If your

ESI[tronic] did not come with an update DVD,

go to the Obtaining a Release Code section.

Note

At this point you may select Yes, update

automatically. However it is recommended

you follow the instructions below as they allow

you to conrm the original installation was

done correctly.

Select the radio button No, perform user-dened

update and Click Continue.

The Data-download window will appear.

If your subscription is for Diagnostic software only (A,

C12) your update screen should look like this:

If your subscription is for Diagnostic Software and

Information Software (A, C, M, P) your update screen

should look like this:

Verify the correct modules are in the right column and

click Continue. The ESI[tronic] update software will

now begin loading.

The next window will look like this:

When the software update installation is complete

you will be asked to restart your computer. ESI[tronic]

Software is now loaded on the PC. Follow the

instructions in section Obtaining A Release Code to

“un-lock” the secured software.

Note

During this portion of the installation, the

software will “uninstall” the older version of

the KTS and load the newer version. This is a

necessary step, do not stop the download — let

the process continue.

4 | Quick Start | Update Software Quick Start | Update Software | 5

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch DDC KIT Spezifikationen Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Bosch DDC KIT