Bosch SKE53M05AU Spezifikationen PDF herunterladen (Seite 20)

en

20

– The connection may be modified by

technicians only.

– A power cord extension may be

purchased from customer service only.

– Use only a residual current operated

circuit-breaker which features

the symbol ‚. Only this extension

guarantees compliance with

the currently valid regulations.

– The appliance features a water

damage protection system. Please

note the system will not function

unless the power supply is connected.

Removing the appliance

Also observe the sequence of worksteps

here.

– Disconnect the appliance from the

power supply.

– Turn off the water supply.

– Disconnect the waste water and fresh

water connections.

– Pull out the appliance, carefully pulling

the hose behind.

Transportation

Empty the dishwasher and secure loose

parts.

Drain the appliance according to the

following steps:

– Turn on the tap.

– Close the door.

– Switch on ON/OFF switch (. The

displays of the last selected

programme light up.

– Select programme with the highest

temperature.

The expected programme duration is

indicated on the numerical display

`.

– Press START button H.

Programme sequence starts.

– After approx. 4 minutes press the

START button H until ‹:‹‚ is

indicated on the digital display.

After approx. 1 min ‹:‹‹ is indicated

on the digital display .

– Switch the appliance off ( and turn

the tap off.

Transport appliance upright only.

(This prevents residual water from running

into the machine control and damaging

the programme sequence.)

Protection against frost (Emptying the appliance)

Protection against frost

If the appliance is in a room where there is

a risk of frost (e.g. holiday home), empty

the appliance completely (see

Transportation).

– Turn off the tap, disconnect supply

hose and drain water.

1 2 ... 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare