Bosch SRX53C15UC Installationshandbuch PDF herunterladen (Seite 69)

Electrical Preparation

Electrical Connection

The dishwasher electrical supply junction box and

dedicated receptacle must be mounted in an accessible

cabinet adjacent to the dishwasher (do not mount the

junction box or receptacle behind the dishwasher). You will

need a 4

” x 2” (108 x 51mm) opening throught the

cabinet in order to pass the junction box through (see

Figure 4). If the opening is made through wood, sand it

smooth. If the opening is made through metal, use the

included protective grommet or other approved method to

protect wiring from damage.

The electrical supply can be connected in

two ways:

Method A - Three-prong plug and receptacle

Use the included three-prong plug and junction box to

connect to a dedicated household receptacle. Make sure

the household receptacle meets the electrical supply

requirements as well as national and local codes (see

Figure 4).

Method B - Permanent connection to household or

field wiring

Remove the included cord set with three-prong plug and

use the supplied junction box to connect directly to the

household or field wiring. Make sure the household or field

wiring meets the above electrical supply requirements as

well as national and local codes (see Figure 6).

To permanently connect to household or field wiring:

1. Remove the dishwasher electrical supply junction box

cover and disconnect the supplied cord set with three-

prong plug from the terminal block by loosening the

corresponding screws (see Figure 6).

2. Replace the included outgoing strain relief with one

suitable for the household or field electrical supply

wiring.

3. Remove 2” to 3” (51 - 76mm) of the outer casing of the

household or field supply wiring as shown in Figure 5.

Remove 3/8” to 1/2” (10 - 13mm) of the insulation from

each wire as shown in Figure 5.

4. Insert the ground leg of the household or field wiring to

the ground connection “ “ of the terminal block and

securely tighten the terminal block screw (see

Figure 6).

5. Insert the neutral leg of the household or field wiring to

the “N” connection of the terminal block and securely

tighten the terminal block screw (see Figure 6).

6. Insert the line leg of the household or field wiring to the

“L” connection of the terminal block and securely

tighten the terminal block screw (see Figure 6).

7. Check all electrical connections to make sure they are

secure and then attach the junction box cover with the

4 screws.

Figure 6

Figure 4

Dedicated

Receptacle or

Field Wiring

Dishwasher

Electrical Supply

Junction Box

Electric cord with

junction box and

three prong plug

are included

with dishwasher

Figure 5

3/8" - 1/2"

(10mm - 13mm)

2" - 3"

(51mm - 76mm)

Remove included

cord set with

3-prong plug and

replace with

household or field

wiring

Replace with

appropriate strain

relief

Avoid Electrical Shock Hazard

To avoid possible injury or property damage, care

should be exercised when the dishwasher is

installed or removed to reduce the likelihood of

damage to the power cord.

WARNING

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch SRX53C15UC Installationshandbuch Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Bosch SRX53C15UC