Bosch ISW-BIT1-HAX WLSN INSTALLATION Spezifikationen Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
wLSN | Reference Guide | 2.0 General Installation
Bosch Security Systems, Inc. | 3/07 | F01U009440-01 13
Figure 1: Device Tamper Switches
1
2
1- Button style tamper switch
2- Lever style tamper switch
3. Hold the device at the planned mounting location.
4. Determine if the RF signal strength is acceptable by
observing the device’s LED flash pattern (Table 3). The flash
pattern appears for 10 min.
Table 3: LED Flash Patterns in RFSS Mode
LED Flash Pattern Signal Strength
Flashes at 1 sec intervals
No packets received or unacceptable
signal strength condition.
Flashes rapidly (0.2 sec interval) Acceptable signal strength
If the RFSS is unacceptable, reposition the device until an
acceptable location is found. If necessary, reposition the
wLSN Hub.
5. Repeat this procedure for each device you are testing. When
you finish testing the devices, return the wLSN Hub’s
switches to their original position.
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare