Bosch K2200 Series Spezifikationen PDF herunterladen (Seite 10)

Visit us at...

www.stanleypac.com

K2200 DOOR CONTROLLER SERIES

The K2200 Series Door Controllers includes the K1200, K2200, K1200IP

and K2200IP door controllers:

The front panel can be used to manage the system in stand-alone mode.

Order slave controllers on network systems without the front panel to

save money on larger systems. Create an access control system with door

controllers, readers, and locks. The power supply supplies power to the

locks and readers.

Features

Manage up to 128 operators and 10,000 cardholders

from a PC-based administration system

Manage up to 32 operators and 4,000 cardholders from stand-alone

mode

Five operating modes

Two K2000/K3000-Series readers or one Wiegand reader for each

door channel

Eight internal relays

10 Mbps Ethernet interface (K2200IP)

Functions

Operating Modes

Stand-alone Mode. Manage the door controllers from the front panel.

Add up to three extra slave controllers, and control up to 16 doors.

Stand-alone mode requires a hard-wired communications link

between the master and the slave controllers

Slave Mode. Configure the door controllers to work as slave

controllers. Manage the slave controllers from another door controller

in stand-alone mode or from a PC-based administration system.

Local Master Mode. Configure the door controllers as local masters.

The local masters connect to the PC directly or through a PC Interface

Kit. Add up to seven additional slave controllers and control up to 32

doors.

Remote Master Mode. This mode is similar to the local master mode;

however, the master door controllers connect to the administration PC

through a Central Network Controller (CNC). CNC communications

occur through hard-wired devices (line drivers or fiber optic

transceivers) over RS-232, or through dial-up modems over PSTN or

TCP/IP.

Dial-up Mode. Program the door controller connected to the remote

site’s modem to dial-back to the CNC during an alarm event or during

selected access granted events.

Local CNC Mode. Each CNC can connect to 32 door controllers and

128 doors at its local site using a hardwired communications link.

Operators

Users can program up to 128 operators.

Door Monitoring

Full door monitoring is built into the door controllers. The door controllers

include inputs for Request-to-exit switches and door contacts. The stand-

alone door controllers can store up to 32 individual time profiles. The door

controllers can store up to 128 individual time profiles. Use these time

profiles to control user access, door operation, and alarms.

Relay Operation

The K2200 Series Door Controllers have eight internal output relays.

Program up to eight relays. PC-based administration software lets users

program a relay to control lighting, operate a video camera, or sound an

alarm.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch K2200 Series Spezifikationen Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch K2200 Series