Bosch NTC-255-PI Bedienungsanleitung PDF herunterladen (Seite 80)

80 en | Advanced Mode IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

Gateway address

For the device to establish a connection to a remote location in

a different subnet, enter the IP address of the gateway here.

Otherwise, this field can remain empty (0.0.0.0).

DNS server address

The device can use a DNS server to find an address of a mail or

FTP server specified as a name. Enter the IP address of the DNS

server here.

Details >>

Video transmission

If the device is used behind a firewall, TCP (Port 80) should be

selected as the transmission protocol. For use in a local

network, choose UDP.

Multicast operation is only possible with the UDP protocol. The

TCP protocol does not support multicast connections. The MTU

value in UDP mode is 1514 bytes.

HTTP browser port

Select a different HTTP browser port from the list if required.

The default HTTP port is 80. To limit connection to HTTPS,

deactivate the HTTP port. To do this, activate the Off option.

HTTPS browser port

To limit browser access to encrypted connections, choose an

HTTPS port from the list. The standard HTTPS port is 443.

Select the Off option to deactivate HTTPS ports and limit

connections to unencrypted ports.

The camera uses the TLS 1.0 protocol. Ensure that the browser

has been configured to support this protocol. Also ensure that

Java application support is activated (in the Java Plug-in

Control Panel of the Windows Control Panel).

To limit connections to SSL encryption, set the Off option in

the HTTP browser port, the RCP+ port, and Telnet support. This

deactivates all unencrypted connections allowing connections

on the HTTPS port only.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 103 104

Keine Kommentare

Bosch NTC-255-PI Bedienungsanleitung Seite 80