Bosch GAS 25 L SFC Professional Bedienungsanleitung PDF herunterladen (Seite 13)

English | 13

Bosch Power Tools 1 609 92A 086 | (28.2.13)

Mounting the Vacuum Hose (see figure A)

–Mount the vacuum hose 8 onto the hose connection piece

7 and turn it in clockwise direction to the stop.

– Insert the extension tubes firmly into each other.

Note: Bosch recommends using static-discharging hoses

with a hose Ø of 19 or 35 mm.

Operation

Starting Operation

 Observe correct mains voltage! The voltage of the pow-

er source must agree with the voltage specified on the

nameplate of the vacuum cleaner. Equipment marked

with 230 V can also be operated with 220 V.

Switch the vacuum cleaner off immedi-

ately as soon as foam or water comes

out, and empty the container. Otherwise, the vacuum clean-

er can become damaged.

 Please inform yourself about the valid regula-

tions/laws for your country concerning the handling of

materials that are hazardous to one’s health.

The vacuum cleaner is suitable for vacuuming and extracting

the following materials:

– Dusts with an exposition limit value > 1 mg/m

The vacuum cleaner may generally not be used in rooms

where the danger of an explosion exists.

Symbols on the Mode Selector Switch

Switching On and Off

–To start the operation of the vac, set the mode selector

switch 4 to on.

To save energy, only switch the vacuum cleaner on when

using it.

–To switch off the vac, set the mode selector switch 4 to

off.

Operation with remote automatic switching (see figure B)

A socket outlet with earthing contact 5 is integrated in the

vacuum cleaner, which allows for connection of an external

power tool. The vacuum cleaner is automatically put into op-

eration via the power tool. Observe the maximal allowable

load of the connected power tool.

– Set the mode selector switch 4 to the operation with re-

mote automatic switching symbol.

For connecting power tools, various hose systems are availa-

ble as accessories.

–To start the operation of the vac, switch on the power tool

connected to the socket 5. The vacuum cleaner starts au-

tomatically.

–To switch off the vac, switch off the power tool. The vacu-

um cleaner switches off automatically approx. 6 seconds

later.

Electromagnetic filter cleaning (SFC)

The machine is equipped with an electromagnetic filter clean-

ing system, which removes dust adhering to the folded filter

12.

The filter cleaning system must be actuated latest when the

vacuuming performance is no longer sufficient.

– Set the mode selector switch 4 to the symbol electromag-

netic filter cleaning. A possibly connected power tool

must be switched off.

The machine vibrates for approx. 10 seconds and switches

off automatically.

– Wait shortly before restarting the vacuuming operation so

that the dust can settle in the container.

The filter cleaning frequency depends on the type and amount

of dust. With regular usage, the maximum vacuuming perfor-

mance is maintained longer.

Wet Vacuuming

 Do not vacuum inflammable or explosive fluids; for ex-

ample, benzene, oil, alcohol, solvents. Do not vacuum

hot or burning dust. Do not operate the machine in

rooms where the danger of an explosion exists. The

dusts, vapours or fluids can ignite or explode.

 The vacuum cleaner may not be used as a water pump.

The vacuum cleaner is intended for vacuuming air and wa-

ter mixtures.

 Before any work on the vacuum cleaner itself, pull the

mains plug.

Note: The requirements for the ingress degree (dust

category L) have only been proven for dry vacuuming.

– Before wet vacuuming, the dust bag 11 must be removed

and the container 9 must be emptied.

– The machine is equipped with level sensors 14. The vac

switches off when the maximum filling height is reached.

Set the mode selector switch 4 to off.

– After vacuuming, remove the folded filter 12 in order to

avoid mildew, and allow it to dry thoroughly, or remove the

vacuum lid 3 and allow it to dry.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the vacuum cleaner itself, pull the

mains plug.

 For safe and proper working, always keep the vacuum

cleaner and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

on Switching On

off Switching Off

Electromagnetic filter cleaning (SFC)

Operation with remote automatic switching

WARNING

OBJ_BUCH-464-006.book Page 13 Thursday, February 28, 2013 2:46 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 145 146

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch GAS 25 L SFC Professional Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Bosch GAS 25 L SFC Professional