Bosch SE2005 Einstellungsanleitung PDF herunterladen (Seite 9)

Security Escort | Installation and Setup Guide | 1.0

S

y

stem Overview

EN | 9

Bosch Security Systems | 1/09 | 33831E

• Additional serial ports (if

needed): Any multi-port board fully

supported by Windows. A four-port

ISA serial port card made by

Digiboard, model AccelePort Xe,

part number 76000035. Required

four-port cable for DB25, part

number 76000008. Digiboard also

makes eight- and sixteen-port

solutions. They may be contacted at

www.digiboard.com.

Databases

• Alarm reports: Each alarm is saved

as a record containing subscriber

data, time and date of alarm,

acknowledgment and silence times,

responding officer, problem

description, and action taken. The

alarm map can be reproduced and the

location text is displayed.

• History: A complete chronological

history of all system actions,

tests, and alarms is recorded.

• Operators: File of those authorized

to use the Security Escort system.

• Subscriber: Complete record of all

subscriber data and current status,

low battery, and last test date and

time.

• Transponders: System configuration

containing all installed equipment

and system interrelationships.

Other Specifications

• Temperature range: 0ºC to +40ºC

(+32ºF to +105ºF)

• Primary power: 120 VAC 900 W (two

computers, two monitors, and one

printer).

• Backup power: 1200 VA UPS per

computer provides 45 min. to 1-hr.

backup. System should also be

backed up by an emergency generator

for extended blackouts (can be

shared with other emergency

equipment).

• Pager: Pager support is included

and selected troubles can be

automatically sent to a service

pager.

1.3.2 SE485 Interface Adapter

Description

The SE485 is an interface between the

pseudo RS-485 signal bus of the

Security Escort Transponder and the

Serial Bus (RS-232) of the Security

Escort central console. The SE485

allows multiple transponders to

interface into a single RS-232 port.

Due to changes made for transient

protection, transformer isolation, and

link busy detection, these signals are

not compatible with third party RS-485

interfaces.

Specifications

• Dimensions: 13.5 cm x 8.5 cm x 30

cm

(5.375 in. x 3.3125 in. x 1.1875

in.).

• Power Source: 9 VDC, 200 mA. An

included 120 VAC adapter to 9 VDC

or from the transponder 9 VDC

terminals.

• Temperature range: 0°C to +65°C

(+32°F to +149°F)

1.3.3 EA500 Transponder

Description

The transponder is a device controller

for up to 64 devices; and any

combination of receivers and alert

units. The devices are connected to

the transponder by means of four-wire

buses; two for power and two for data.

There are eight buses and each bus is

capable of supporting up to eight

devices. The Security Escort system

supports up to 255 transponders.

Specifications

• Compatible Enclosures:

- Small indoor: AE1

- Large indoor: AE3 (recommended)

• Temperature range:

-40°C to +65°C

(-40°F to +149°F)

• Power Source: 18 VAC, 50 VA (can

use TR1850, 110 VAC to 18 VAC

transformer)

• Battery backup: 12 VDC lead acid

battery

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare