Bosch 430 Spezifikationen PDF herunterladen (Seite 10)

10/17

Bosch Rexroth Canada ı 16.10.2008 ı Revision 2.2

Function

Parameter

No.

Description

Blast mode

Sets the mode for the Blast feature

Manual – The conveyor will output a percentage of maximum

as set in P39.

Auto – The conveyor will output the rate set in P38.

Note: The blast mode will be the same as the control mode

set in P20.

Spinner stop or

no stop

Sets the action of the spinner.

Never – Spinner will always turn when the dial is set.

Speed – Spinner will start and stop with ground speed.

Pause – Spinner will only stop when the pause button is

pressed.

Speed & Pause – Spinner will stop with ground speed

and the pause button.

Conv. Pulses

per rev.

This value is the number of pulses generated by the conve

yor

motor feedback sensor with every rotation.

CLP blast

Determines the conveyor output in LB’s/mile or kg/km while

the conveyor is in closed loop mode. Do not exceed maximum

application rate setting. (Parameter 9)

Blast mode

rate

The number shown

here is the percentage of maximum

conveyor output speed at which the system will operate while

in manual Blast mode.

Calibrating the

ground speed

Ground speed calibration

–

see

calibration procedure on page

13.

Ground Speed

pulses per Km

or Mile

e number of Pulses per Kilometer or Mile produced by the

ground speed sensor. This parameter is calculated by the

controller during the calibration process and requires no

adjustment. (Please see page 14 for further discussion.)

Over

speed

alarm

A warn

ing buzzer will sound when the vehicle speed exceeds

set value in MPH or KM/H. (Set the parameter to 0 to turn

function off.)

System Units

This parameter selects either metric (0) or imperial (1)

operation.

System

language

This parameter selects th

e language; (0) for English and (1)

for French.

Resetting all

parameters

Resets all parameters to factory default settings

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch 430 Spezifikationen Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Bosch 430