Bosch CC880/LP880, SC8016 Spezifikationen PDF herunterladen (Seite 6)

CC880/LP880, SC8016 | Quick Reference Guide | 1. Overview EN | 6

Bosch Security Systems | 6/04 | 4998152461B

1. Overview

1.1 Introduction

Thank you for choosing the Solution Ultima 880

Model CC488 control panel for your installation.

You will find this system extremely flexible, reliable,

and easy to use. The quick reference guide supplied

with the system provides users with enough basic

information to wire, configure, and program the

system. Due to the systems many programmable

features and options, obtain the complete Installation

Manual that provides detailed information on system

options, functions, and programming methods.

1.2 Programming

The programming options of the system are stored in

a non-volatile EPROM. This memory holds all

information during a total power loss and can be

changed as many times as required.

The entire programming sequence consists of

entering a location number and changing the data as

required.

Use the following methods to program the system:

• Codepad

• Hand Held Programmer

• Alarm Link Software

1.3 Programming Using a Codepad

The system must be disarmed (with no active alarm)

to program the system. If there is an active alarm or

the system is armed, enter the code for User 1

(Default = 2580) followed by the [#] key. User Code

1 is the Master Code factory default.

To enter installer’s programming mode, enter the

installer code (Default = 1234) followed by the [#]

key. Two beeps sound and both the STAY and

AWAY indicators flash simultaneously to indicate

that you entered programming mode. The codepad

indicators display the current data programmed in

LOCATION 000 (first location of the Primary

Telephone Number).

To move to another programming location, enter the

location number followed by the [#] key. The data in

the new location is displayed using the codepad

indicators. (For example, if you entered [3 4 #], the

system jumps to LOCATION 034, the beginning of

the Subscriber ID Number for Receiver 1.)

To move to the next location, press the [#] key. This

steps you to the next location. The data in the next

location is displayed using the codepad indicators.

(For example, if you are currently positioned at

LOCATION 034, pressing the [#] key takes you to

LOCATION 035.)

To step back one location, press the [*] key. (For

example, if you are currently positioned at

LOCATION 35, pressing the [*] key takes you back

to LOCATION 34.)

To change data in the current location, enter the new

value (0 to 15) followed by the [*] key. This stores the

new data into the location. (For example, if you enter

the value [1 4 *], both the Zone 4 indicator and the

MAINS indicator display to represent the new data

value.)

To move to the next location, press the [#] key. The

data in the next location displays.

To exit Installer’s Programming Mode, enter

[9 6 0 #]. Two beeps sound and the STAY and

AWAY indicators no longer display. The system

returns to the disarmed state and is ready for use.

Table 1 displays a quick guide to programming:

Table 1: Quick Guide to Programming

Task Keys to Press

Enter Installer’s

Programming Mode

[1 2 3 4 #]

Exit Installer’s Programming

Mode

[9 6 0 #]

Step to next location [#]

Step back one location [*]

Program new data into

location

[Data][*] (Data = 0 to 15)

Jump to another location [Location Number][#]

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch CC880/LP880, SC8016 Spezifikationen Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch CC880/LP880, SC8016