Bosch DS7447 Betriebsanweisung PDF herunterladen (Seite 19)

– 19 –

Optional Operations (continued)

Day to Day Operations (continued)

Automatic Arming

Each partition can be programmed to automatically arm once per day. Automatic Arming is not programmable from an RF (wireless) keypad.

If Automatic Arming is used in Master Keypad mode, it will affect all partitions you have access to. If used in single partition mode, or from a

single partition keypad, it will affect only the partition you are working in.

It is recommended that this procedure be performed at a DS7447/DS7447E keypad. No visual clues will be given from a DS7445/

DS7445i keypad.

Setting the Automatic Arming Time Notes

[Master PIN] + [#] + [0] Setting the Automatic Arming Time can only be performed in the Master

Programming Mode.

[1] To enter the Automatic Arming Setup programming

Enter the partition number.

Press [#] to exit.

•

If programming is done from a Master Keypad that is

not

in Single Partition

Mode, you will be prompted to enter the Partition to be programmed.

•

You will only be allowed to program the Partitions to which you are

assigned.

•

If programming from a standard keypad or from a Master Keypad in Single

Partition Mode, this step will be skipped.

Enter a time for each day in 24-hour clock format.

•

The display will start with Sunday. It will read, “Sunday –nn : nn”

•

Enter the time in 24-hour clock format, then press the # key. If you make a

mistake, press the # key twice to move back to your last entry.

•

Time Examples: 12 midnight = 2400# 12 noon = 1200#

12:01 am = 0001# 12:01 pm = 1201#

1:00 am = 0100# 1:00 pm = 1300#

Disabled = 0000#

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Keine Kommentare

Bosch DS7447 Betriebsanweisung Seite 19