Bosch DS7447 Betriebsanweisung PDF herunterladen (Seite 46)

– 46 –

Single Partition Mode

The Master Keypad (continued)

Single Partition Mode is used to control partitions on a “one at a time/one by one” basis from the Master keypad.

To enter the Single Partition Mode, enter your [PIN], then press the [#] key twice. This will call up the first partition you have access to. Enter

the command sequence you wish for this partition. You do not need to use your PIN again. To move on to the next partition you have access

to, press the [#] key twice.

To exit the Single Partition Mode, hold the [*] key down for 2 seconds. The system will also automatically drop out of Single Partition Mode

after 40 seconds without a keypad entry.

Example of accessing Single Partition Mode

1. Enter your [PIN], followed by the [#] key twice: [1] [2] [3] [4] [#] [#].

2. The first partition you have access to will be displayed: “Ready to Arm. Cafeteria.”

3. Complete the command sequence (in this case arming) you wish for this partition: [#] [On].

4. Move to the next partition you have access to by pressing the [#] key twice: [#] [#].

5. The next partition you have access to will be displayed: “Ready to Arm. Office.”

6. Complete the command sequence you wish for this partition.

7. After you have completed all the command sequences for the partitions you have access to, exit Single Partition Mode by pressing the [*]

key for two seconds.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Keine Kommentare

Bosch DS7447 Betriebsanweisung Seite 46