Bosch Solution 16plus Spezifikationen PDF herunterladen (Seite 19)

Turning Output Devices On/Off

This feature is only applicable if your security company has programmed an output that can

operate external devices (ie. toggle on/off via the codepad). The output programmed by your

security company could control a pool pump or outside lighting etc. Up to five different

outputs can be programmed.

How To Turn An Output On or Off

1. Enter your Master Code followed by 5 and the # button (eg. 2580 + 5 + #).

Three beeps will be heard and the STAY and AWAY indicators will begin to flash.

2. Enter the output number (1 – 5) that you wish to turn on or off.

3. Press the # button to turn the output device on or press the * button to turn the output

device off. Three beeps will be heard if the output device is turned on and two beeps

will be heard if the output device is turned off.

Repeat Step 2 and Step 3 if more than one output devices are required to be turned on

or off.

4. Press the # button to exit this function.

Two beeps will be heard and the STAY and AWAY indicators will extinguish.

Output Device 1

Output Device 2

Output Device 3

Output Device 4

(Auto) Output Device 5

Time AM / PM

Have the security company detail the devices that can be turned on and off via the codepad

above. Output device 5 can be programmed to automatically turn on at the same time every

day and can be overridden via the codepad.

Reset Latching Outputs

This feature is only applicable if your installer has programmed an output to latch (remain

on) until you acknowledge the event that occurred.

How To Reset Latching Outputs

1. Press and hold button 7 until two beeps are heard.

The output will now reset.

!"#$%&"'()* Operators Manual 19

Electronics Design and Manufacturing Pty Limited ISSUE160.DOC

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Keine Kommentare

Bosch Solution 16plus Spezifikationen Seite 19