
1.
Turning
"ON" POWER
Switch
O
Turn
ON
the
POWER
switch at the front of the body.
When the openiclose lever is set to
"LOCK"
(left side), settings light up on the display. The
autoclave is ready in this state. When the
open/close lever is set
to
"UNLOCK"
(anywhere other
than
on the left side),
"
L
is shown on the display.
Ready
state
2.
Pouring
Water
,
<r>.
IMPORTANT
0
In operation of
UNLOCKLOCK
lever, never fail
to
put
POWR
switch
ON.
a
Slide the open/close lever to the
UNLOCK
side (the right end).
@
Grab the handle, and lift the lid
as
shown in the figure below.
@
Pour water through the opening of the working chamber until you can see water through the
hole at the center of the bottom plate.
The HV-25 requires
1.5
liters or more of water; the HV-50,2 liters or more; the HV-85,4 liters or
more; and the
HV-110.5 liters or more.
It is also required to pour water for Mode
4
(AGAR).
Kommentare zu diesen Handbüchern