Bosch HIIP054U Bedienungsanleitung PDF herunterladen (Seite 43)

English 40

Service

Self Help

Cooktop Troubleshooting

Use these suggestions before calling for service to avoid

service charges.

9 WARNING

Repairs should only be done by a trained

servicer.

Improper repair of your appliance may result in

risk of severe physical injury or death.

Cooktop Problem Possible Causes and Suggested Solutions

none The electric power supply has been

cut off.

Use other electrical appliances to check whether

there has been a power cut.

The appliance has not been cor-

rectly connected following the con-

nection diagram.

Check that the appliance has been connected

correctly according to the connection diagram.

Electronic system malfunction. If the measures above cannot resolve the mal-

function, contact the Technical Assistance Ser-

vice.

The indicators flash The control panel is damp or an

object is resting on it.

Dry the control panel area or remove the object.

The indicator - flashes

on the cooking zone

indicators

A fault has occurred in the electronic

system.

Briefly cover the control panel with your hand to

confirm the malfunction.

“§ + number / š +

number /

¡ + number

Electronic system malfunction. Unplug the cooktop from the mains. Wait about

30 seconds before plugging it in again.*

”‹ / ”Š

There is an internal operating error. Unplug the cooktop from the mains. Wait about

30 seconds before plugging it in again.*

”ƒ

The electronic system has over-

heated and the corresponding

burner has been turned off.

Wait until the electronic system has cooled down

sufficiently. Then touch any symbol on the cook-

top. *

”…

The electronic system has over-

heated and all burners have been

turned off.

”† + power level and

beep

There is a hot pan on the control

panel. It is highly likely that the elec-

tronic system will overheat.

Remove that pan. The malfunction indicator will

turn off shortly afterwards. You can carry on

cooking.

”† and beep

There is a hot pan on the control

panel. The burner has turned off to

protect the electronic system.

Remove that pan. Wait a few seconds. Touch any

key on the control panel. When the malfunction

indicator turns off, you can carry on cooking.

—‚

Incorrect supply voltage, outside

normal operating limits.

Contact your electricity distributor.

—ƒ / —„

The burner has overheated and has

turned off in order to protect its

cooking surface.

Wait until the electronic system has cooled down

sufficiently before turning it back on.

* If the warning persists call the Technical Assistance Service.

Do not rest hot pans on the control panel.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch HIIP054U Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Bosch HIIP054U