Bosch FPA-1200-MPC Betriebsanweisung Seite 49
- Seite / 100
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
!
Caution!
Alarm messages from bypassed detectors are no longer displayed; only faults in these
detectors are displayed.
Starting time to investigate
!
Caution!
If another alarm is triggered during the verification time (external alarm), the verification time
is suspended until the queued fire alarms are reset.
If there is the possibility of testing, the following time spans are displayed. The counters count
to zero:
– Time to acknowledge The alarm must be confirmed within the specified time span.
– Time to investigate The alarm must be verified within the specified time span. This time
can be specified differently for each logical zone or detector.
– Reset possible in : Time span after which the detector can be reset. For information on
resetting, see Resetting alarm message, page 50.
!
Caution!
If the time to acknowledge or the time to investigate is exceeded, the alarm is immediately
forwarded to external stations.
To initiate alarm verification, select Acknowledge within the time shown to confirm the alarm.
!
Caution!
If the alarm is not confirmed within this time, it will be forwarded to external stations.
The time to investigate will be displayed. The alarm verification is initiated.
Test the fire alarm onsite within the specified time.
!
Caution!
If a second alarm is triggered during the alarm verification, all alarm messages are
automatically forwarded to external stations.
If, after conclusion of the alarm verification, a second alarm comes in — assuming alarm
verification is also possible for this alarm — then a time to investigate is initiated automatically
again.
Triggering alarm manually
!
Caution!
If, during the check, a real fire alarm is detected, then this alarm to the panel must be
manually forwarded to external stations such as the fire department. Alternatively, a manual
call point can be triggered at the location.
1. To forward the alarm to external stations, select Manual alarm.
2. Select OK to confirm the operation.
The alarm is forwarded to the fire department:
In the LED display, the "Transmission Device activated" signal light turns red.
10.6.2
10.6.3
Panel Controller Fire alarm | en 49
Bosch Sicherheitssysteme GmbH User Guide 2013.07 | 3.0 | F.01U.258.929
- Panel Controller 1
- Table of contents 3
- For your information 8
- For your safety 10
- All functions at a glance 12
- Diagnostics 13
- Maintenance 14
- Configuration 16
- Further functions 17
- Search Function/Element 17
- Logical zone Detector 18
- This panel 18
- Reset -> Event type Scope 18
- In overview 19
- Display elements 20
- Touch screen 22
- Standby display 23
- Display support information 24
- Operating principle 25
- Logging out 26
- Working with lists 27
- Various states of list fields 28
- Entering numbers and text 30
- Changing an entry 31
- Deleting all numbers 32
- Entering key combination 32
- Elements Zone Element 33
- Numbers 3 4 33
- Networked panels 34
- Networking via Ethernet 37
- Ethernet redundancy 38
- Remote keypad 40
- Types of alarm 41
- Entry delays 41
- Day and night mode 42
- Alarm message to the panel 43
- Fire alarm 47
- Alarm verification 48
- Starting time to investigate 49
- Triggering alarm manually 49
- Resetting alarm message 50
- Bypassing detectors 50
- Fault message 52
- Resetting malfunction message 55
- Isolating an element 55
- Caution! 56
- Menu overview 57
- Using the menu 58
- Bypassing/Un-bypassing buzzer 59
- Via the status bar 61
- Hardware 63
- Consistency check 66
- Ethernet ports 66
- Send ping command 67
- Voice alarm systems 68
- Diagnostics 69
- Maintenance – walktest 73
- Starting and ending walktest 75
- Maintenance – history log 77
- Printing out data 79
- Showing details 81
- Group setting 85
- Detector sensitivity 85
- Operator 86
- Set Default Password 87
- – Time zone 88
- – Menu name 88
- Remote Access 90
- Change password 90
- Performing a fire drill 91
- Alarm Counters 91
- Resetting elements 93
Verwandte Produkte und Handbücher für Fernbedienungen Bosch FPA-1200-MPC
(4 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.118 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern