Bosch FPA-1200-MPC Betriebsanweisung PDF herunterladen (Seite 71)

100

6. Select All to activate all notification appliances.

7. To end activation of the selected elements, repeat the same steps but select Off in step

Notice!

In the HVAC element category, the Auto function field is also offered. Select this function

field to assign automatic mode to a fan, for instance.

Activate Transmission Device

To activate a transmission device:

1. In the start menu, select Maintenance

2. Activate transmission device

A list of the elements is displayed. Refer to Working with lists, page 27 for information on

how to navigate through a list.

3. Select the required list fields.

The list fields are marked.

4. Select On.

The selected transmission devices are activated:

To end activation of the selected elements:

1. In the start menu, select Maintenance

2. Activate transmission device

3. Select the list fields of the activated transmission devices.

4. Select Off.

The transmission devices are no longer activated.

Detector removal

Notice!

To remove a detector, all acoustic signals and transmission devices are bypassed for 15

minutes. They are automatically un-bypassed when the 15 minutes are up.

The acoustic signals can also be manually un-bypassed before the specified time has elapsed.

To remove a detector:

1. In the start menu, select Maintenance

2. Remove detector

3. Select OK to confirm the request. The following message appears:

All signaling and transmission devices will be inoperative for %d min

%d is used as a placeholder for the time that was defined in the FSP-5000-RPS

programming software, e.g. 15 minutes. The counter then counts from 15 minutes to zero

minutes. The detectors can be removed during this time.

To switch the signaling devices back on before the 15 minutes are up:

4 Select Restore manually disabled outputs.

When the 15 minutes are up, the panel emits a brief signal tone and the start menu is

displayed.

Change device on V.24 Interface

On the V.24 interface, other devices can be optionally assigned in addition to a permanently

assigned device.

15.4

15.5

15.6

Panel Controller Maintenance | en 71

Bosch Sicherheitssysteme GmbH User Guide 2013.07 | 3.0 | F.01U.258.929

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch FPA-1200-MPC Betriebsanweisung Seite 71

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Bosch FPA-1200-MPC