Bosch Remote Control Bedienungsanleitung PDF herunterladen (Seite 47)

I-Remote Installing a Remote Communications Network (RAS) 9-11

DOK-IWORKS-IREMOTE*V01-AW01-EN-P

IP addresses must be given for both WAN adapters (modems) involved in

the TCP/IP connection between service PC and control unit. These IP

addresses are assigned to both participants by the RAS-Server when the

connection is established. Set a static address pool here. The address

pool spans the private address area of a class C-net from 192.168.0.1 to

192.168.0.2.

Note: Since addressing during the I-Remote uses IP addresses, it

must be ensured that a fixed IP address is assigned to every

control unit. When using DHCP this assignment must be

preset on the DHCP server.

To coordinate the IP addresses, contact your network

administrator.

If your RAS connection has a function for resolving names

(WINS server or LMHOSTS file), the connection during a

remote session can also be established using the computer

name

RAS_INSTAL_16.bmp

Fig. 9-17: Finish RAS configuration

Finish the wizard

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Keine Kommentare

Bosch Remote Control Bedienungsanleitung Seite 47