Bosch B450 Installationsanleitung PDF herunterladen (Seite 47)

2. Press and hold the default button.

3. Reconnect the AC MAINS supply to the control panel.

4. Wait 3 to 5 sec and release the default button.

Configuring for email

A mailbox can be set as a receiver, the Solution 2000/3000 series control panels can send

Email event reports to the configured mailbox through B426 or B450.

Two mailboxes are needed, one acts as receiver, the other acts as a sender. The control panel

needs to connect to the mail server of the sending mailbox.

Example:

The example in Table 1 – Table 4 sets the two receivers as Email receivers and uses two

network modules. These parameters can be set from A-Link or a codepad.

Table 1: Receiver configuration table.

Item

Location Set Value Panel Value Option

Receiver 1

Transmit Format

0033 Email 9 0 = Not used

1 = Contact ID

4 = Domestic

6 = SIA FAST

7 = SIA SLOW

8 = CSVIP

9 = Email

Receiver 1

Subscriber Number

0034 -

0039

001234 00 12 34

Receiver 1

Extern network

module

0081 2 2 0 = Not used

1 = Use, do not

configure

2 = Use and

configure

Receiver 1

IP+port/Email

1000 -

1099

[email protected]

61 75 73 71 72 74

40 67 6D 61 69 6C

2E 63 6F 6D

The receiver

mailbox

(ASCII Code)

Receiver 2

Transmit Format

0073 Email 9 0 = Not used

1 = Contact ID

4 = Domestic

6 = SIA FAST

7 = SIA SLOW

8 = CSVIP

9 = Email

Receiver 2

Subscriber Number

0074 -

0079

003365 00 33 65

5.3

Control Panel Configuration | en 47

Installation Guide 2014.07 | 00n | F01U298026

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch B450 Installationsanleitung Seite 47

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch B450