Bosch SF8172V Spezifikationen PDF herunterladen (Seite 116)

FLIR

32-3

2 Upgrade for installation site with no internet access:

a Download the firmware corresponding to the D-series/PT-Series/F-Series in your

office to a PC which will be performing the installation.

b Go to settings and make sure the D-series/PT-Series/F-Series is checked.

c Go back to Check for updates and this process will download the firmware for this

camera.

d Go to the installation site and click on Detect & Upgrade to search your camera.

e Select the camera and upgrade.

Or alternatively, contact FLIR support (nexus.support@flir.com) who will upgrade/provide

support to upgrade the camera firmware:



3 Upload Tyco_VE44_Compatibility_patch.sh using the following steps:

a Unzip file 141_Tyco_VE44

b Access camera web interface

c Select Maintenance -> Files -> Firmware

d Stop Nexus Server via green control (Bottom left corner of camera web interface)

e Scroll down Firmware page to Firmware section

f Click Brown button

g Select file Tyco_VE44_Compatibility_patch.sh

h Select Upload button

This will take a few minutes and the web interface will not respond until the upload

is complete. Camera will reboot.

4 To check if camera has upgrade correctly:

a Wait for camera to reboot

b Access camera web interface

c Select Help -> Scroll down page

The following should be read below Hardware Information:

Tyco VideoEdge 44 Compatibility Patch



Created on Thu Mar 27 2014

Fixes & Enhancements

VE Handler: NVR_Handler_FLIR-4.4.0.16024.x86_64.

• Camera handler release 4.4.0.16024 resolves the zoom issue with FLIR D-618 cameras.

All FLIR camera firmware needs to be upgraded with the latest FLIR Release Firmware (ww.1.4.1

with the Tyco_VE44_Compatibility_patch and Nexus Server 2.5.17.14) to work with this camera

handler release (NVR_Handler_FLIR-4.4.0.16024.x86_64).

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 174 175

Keine Kommentare

Bosch SF8172V Spezifikationen Seite 116