Bosch SF8172V Spezifikationen PDF herunterladen (Seite 162)

SONY

37-7

All SONY Cameras 1 Set camera to factory

default via camera web

gui or SNC toolbox

before adding the

camera to NVR

2 Retrieving camera

configuration on NVR

does not required

authentication.

Due to SONY camera over-

configuration issues, camera

may not respond to the following

resolution change request. If this

happens, camera will return its

own setting.

For example:

From:

H.264@5fps 640x480

MJPEG@5fps 640x480

To:

H.264@5fps 720x576

MJPEG@5fps 640x480

Bit rate behavior is inconsistent

for different models

SONY camera CGI Get

commands does not require

authentication.

In this case, user will see the

newly requested resolution

setting listed on NVR. No error

message is displayed on NVR.

User must refresh NVR screen

and check camera setting via

camera web gui to confirm if

change request is executed

successfully.

Workaround:

Repeat command on NVR

Bit rate may not be set

successfully in NVR 4.3, 4.4 but

it will be normal in NVR 4.5

All Models The focus value is set from 0-

45056, which is not user-friendly.

Workaround is to enable

autofocus , or change settings on

Camera Web GUI

SONY Generic The SONY Camera Handler

supports generic cameras for

those unlisted models. If one

camera is not in the supported

list, but is compatible with the

SONY interface, it can be

supported as a generic camera.

Model(s) Known Camera

Limitation/Behavior

Notes

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 174 175

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch SF8172V Spezifikationen Seite 162

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch SF8172V