Bosch SF8172V Spezifikationen PDF herunterladen (Seite 74)

American Dynamics IP SpeedDome

24-3

25fps @ D1 resolution @ quality 40; while the secondary MJPEG

stream is 7fps @ CIF resolution @ quality 70

• When codec is MPEG4/MJPEG:

•The maximum frame rate for the MPEG4 stream is up to 30fps at any

resolution and quality if the secondary MJPEG stream is set to 7fps @

CIF resolution @ quality 70. If the secondary MJPEG stream is set to

25fps @ D1 resolution @ quality 70, then the frame rate for the MPEG4

stream is up to 25fps @ D1 resolution @ quality 90.

• The zoom speed is fixed.

• Audio will not work unless it is enabled through the camera web interface.

• In victor, the Iris restore button does not work for ADIPDome Camera on victor Surveillance

view.

Known Issues

• When using IP Dome firmware 2.0.0.645 for streaming H.264 only, users should not use rewind

instant play back with victor client. Users should use Search and Retrieve, or don’t configure

using a H.264 stream.

• The default values for some properties defined on NVR are different from camera’s default.

• The dry contact state always returns unknown.

• The definition of preset and pattern in NVR might be changed by user via web-client.

• The NVR will not recognize any presets or patterns already on the dome when it is added to the

NVR.

• The NVR will not recognize any presets or patterns added to the dome via its web interface and

in fact the NVR may overwrite them.

• Preset and pattern definitions made on the NVR will be mirrored to the device, but not the other

way around.

• Preset and pattern definitions should be retained in case of network loss or disconnection /

reconnection.

• Preset and pattern definitions will not be deleted when the dome is deleted from the NVR.

• Clients should show only the presets and patterns that have been defined using the NVR (not all

96 slots, defined or not). Presets and patterns defined through the device web configuration will

not be shown

• When using the settings H.264 codec, D1 resolution, 25/30 (PAL/NTSC) FPS and the quality is

above 90, video will freeze when opening Live View.

• Iris restore button does not work for when using surveillance with victor.

• If the camera loses power or network connection, after coming back online the Dry Contacts will

not trigger. A user must disable and then re-enable Dry Contacts on the NVR Gui (Go to Devices

‐ Alarms) to restore the event alerts. Other configuration changes (to codec, fps, resolution etc)

do not affect the Dry Contacts.

Note

Please refer to the AD IP SpeedDome Release Notes for additional information.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 174 175

Keine Kommentare

Bosch SF8172V Spezifikationen Seite 74