Bosch SF8172V Spezifikationen PDF herunterladen (Seite 142)

Panasonic Corp

34-9

Special Points

• The handler will ignore the model prefix of every camera. So for example, "WV-SC385" and

"DG-SC385" will be regarded as the same camera with same features. Currently four prefixes

have been seen for Panasonic cameras, they are WV/DG/WJ/BB.

• It is recommended when the camera is added to the NVR, not to change any property

parameters on the camera web GUI (unless specified on the release notes)

• When a camera is added, the default video codec will be H.264 if it is supported by the camera

and selected as the Video encoding format on the camera-direct web-page. If not, then

MJPEG will be used to establish the first video stream. If not, MPEG-4 will be used if it is

available.

• For the cameras that support pattern, the supported pattern count is based on configuration of

the camera which might be 1, 2 or 4.

• For those cameras that support image white-balance, the option supports 3 settings, namely

• “1” - Automatic white balance control mode. (AWC)

• “2” - Automatic tracing white balance mode.(ATW1)

• “3” - Automatic tracing white balance mode under a sodium lamp.(ATW2)

• Some Video Properties like Brightness/Saturation/Sharpness are normalized to percentage (0-

100), but the real value in camera is range from nCameraMin to nCameraMax which result in the

values in NVR not covering all values in Camera.

SF342

NW960

NW964

NS950

NS954

Due to the camera limitation, the quality of MPEG4 is always ‘Normal’ and can’t be

changed. So changing of MPEG4 quality from NVR web page will not take effect

and the quality value will always be 50.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 174 175

Keine Kommentare

Bosch SF8172V Spezifikationen Seite 142