Bosch SF8172V Spezifikationen PDF herunterladen (Seite 146)

Pelco

35-4 Camera Handler Release Notes

Work around: Use camera WEB GUI

7. PTZ Pattern is not supported

Reason: Camera limitation

8. Audio PCMA not supported

Reason: Camera limitation.

9. Audio Codec can't set or change.

Reason: Camera limitation.

10. Audio volume is modified via NVR web GUI, the volume on camera web GUI may not be

changed.



Reason: Camera firmware limitation.

11. Audio cannot be mute if volume is set with 0 via NVR web GUI.

Reason: Pelco API limitation.

12. D5118] Sometimes focus function of camera stops working unless factory default.

Reason: Camera Limitation

Work around: Camera factory default

13. There is no obvious change in image quality, when user adjusts Hue in NVR.

Reason: Camera firmware limitation.

14. Sometimes, NVR page pop up hint "Could not update the camera video properties”

Reason: Camera response is slow.

Work around: Refresh NVR webpage.

15. Sharpness is not supported. This may be different with camera web GUI.

Reason: Pelco API limitation.

16. 

17. Sometimes cameras cannot be found in discovered device list after auto-discovery.

Reason: Slow camera response and NVR can only wait for 5 seconds.

Work around: Check the network environment and retry again.

18. [IM10LW-1] To enable edge-based motion, it is recommended to set the FPS less than 30 and

resolution less than 640X352. Once edge-based motion is enabled, if the user wish to go back

to 720p the FPS needs to be set to 12FPS click "Apply" and change the resolution to 720p.



Reason: camera limitation.

Known Issues

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 174 175

Keine Kommentare

Bosch SF8172V Spezifikationen Seite 146