Bosch DS7445i Betriebsanweisung Seite 11
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
DS7240/DS7220 User's Guide Copyright 2002 Detection Systems, Inc. P/N: 49211C Page 11
PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD
4.8 Turn the System On with No Entry Delay
Description
Use this function to turn the system All On, Perimeter
Only or Partial On without Entry Delay.
Turning the system on with No Entry Delay
eliminates the Entry Delay time on any Delay
zone (for example, the Front Door).
1. Make sure that all zones are normal (not faulted).
2. Enter a valid user PIN.
3. Turn the system on using one of the following
methods:
• All On: Press [On] (or enter [#] +[1])
• Perimeter Only: Press [Perimeter Only] (or
enter [#] + [2])
• Partial On: Enter [#] + [3]
The keypad display shows the following for
turning the system All On:
60 seconds to
All On.
To bypass zones
Press Bypass.
For no entry
Press No Entry.
The display shows the following for Perimeter
Only (display shows “Partial On” on second line if
system is turned Partial On):
60 seconds to
Perimeter On.
To bypass zones
Press Bypass.
For no entry
Press No Entry.
4. To turn the system on (All, Perimeter Only or
Partial On) with No Entry, press the [No Entry]
key.
5. When the system is All On with No Entry, the
keypad displays the following:
Smiths Residence
All On
On with No Entry
If the system is Perimeter Only On or Partial On
with No Entry, the keypad displays the following
(if the system is Partial On, the second line will
say “Partial On”):
Smiths Residence
Perimeter On
On with No Entry
The Armed LED flashes, indicating the system is
On with No Entry Delay.
If a Delay zone is faulted while the system is
On with No Entry Delay (for example, the front
door is opened), the system immediately
initiates an alarm event. Enter your PIN to
silence the alarm. See “Silence Alarms” on
page 8 for more information.
6. To turn the system off, enter a valid PIN.
4.9 Turn the System On with No Exit Tone
Description
Use this function to turn the entire system All On,
Perimeter Only or Partial On without any Exit tones.
Turning the system on with no Exit tones
eliminates the tone emitted by the keypad
intended to alert occupants that the system is
about to arm.
This function is useful if you want to turn the system
on, but not disturb the occupants while the system
counts down prior to turning on.
Procedure
1. Make sure that all zones are normal (not faulted).
2. Enter a valid user PIN.
3. Turn the system All On, Perimeter Only or Partial
On using the appropriate key sequence. See
Table 6.
For example, press and hold the [On] key to turn
the system All On. Or press the [#] key and then
press and hold the [1] key.
Arming Function To Silence Exit Tone
Press and hold [On]
OR
All On
Press [#], then press and hold the [1] key
Press and hold [Perimeter Only]
OR
Perimeter Only
Press [#], then press and hold the [2] key
Partial On Press [#], then press and hold the [3] key
Table 6: No Exit Tone Key Sequences
Silencing the Exit tone doubles the Exit Delay
time.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i
(175 Seiten)
(44 Seiten)
(8 Seiten)
(64 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern