Bosch DS7445i Betriebsanweisung Seite 36
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Page 36 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD
5.13 Change PIN
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [5] + [5]
Description
Use this function to change your Personal
Identification Number (PIN) at any time. Only use
this feature under the direction of your Security
Company. Write down your old PIN and the new one
before you begin.
Procedure
1. Make sure that your system is turned Off (Armed
LED is off).
2. Enter a valid user PIN (this is the PIN you will
change).
3. Enter [#] + [5] + [5].
4. Enter your current PIN. The keypad turns on the
Zone LED that corresponds with your user
number (1-16). For example, if your user number
is 1, the "1” LED turns ON.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10 11 12
13 14
15 16
Zone 1 LED ON
PerimeterArmed
5. Enter a new PIN with the same number of digits
as your old PIN. If the error tone sounds (four
quick beeps), try a different new PIN.
6. Enter your new PIN again. The keypad sounds
the OK tone (one high-pitched beep) and exits
this function. You have successfully changed
your PIN.
5.14 Change Others’ PINs
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [5] + [6]
Description
Use this function to change PINs for each user in the
system. You cannot use this function to change your
own PIN (for example, if you enter the User 1 PIN to
access this function, you cannot change the User 1
PIN. Use the “Change PIN” function).
This function requires the appropriate authority level
to change PINs. Only use this feature under the
direction of your Security Company.
[#]+[5]+[6] is only for changing PINs other
than the one used to access this function. For
example, if User 1 enters [#]+[5]+[6], he/she
cannot modify his/her PIN. Use [#]+[5]+[5]
instead.
Procedure
1. Make sure that the system is turned Off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [5] + [6].
Zone LEDs 1, 2 and 3 flash (Status LED
continues to flash).
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
4 5 6 7 8
9 10 11 12
13 14
15 16
Armed Perimeter
Flashing Status LED
1 2 3
Flashing Zone LEDs
The flashing Zone LEDs represent the selections
you may make by pressing the corresponding
number key.
• 1: To change PINs, press [1].
• 2: To change PIN authority levels, press [2].
• 3: To assign an area to a PIN, press [3].
4. Press [1] to change PINs. The available user
numbers now flash (the example below shows
user numbers 1-6 as available users). The Status
LED continues to flash.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
7 8
9 10
11 12 13 14
15 16
Armed Perimeter
Flashing Status LED
1 2 3 4 5 6
Flashing LEDs indicate
available users
5. Enter the user number whose PIN you want to
change followed by the [*] key. For example,
press [2] + [*] to change the PIN for User 2. The
“2” LED now stays on steady while the other
LEDs (including the Status LED) flash.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i
(175 Seiten)
(44 Seiten)
(8 Seiten)
(64 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern