Bosch DS7445i Betriebsanweisung Seite 19
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
DS7240/DS7220 User's Guide Copyright 2002 Detection Systems, Inc. P/N: 49211C Page 19
PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD
4.22 View System Trouble
Key Sequence: [#] + [4] + [2]
Description
Use this function to view system troubles. For
example, a system trouble occurs when the system is
running only on the backup battery, there is
communications trouble, or it is time for the system to
be serviced by your Security Company.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [4] + [2].
The keypad displays all system trouble events (if
any) one at a time. The following are some
examples of system troubles:
− If the system has no AC main supply and
is only running off of the backup battery,
the keypad displays:
System running
on battery only.
− If the system fails to communicate with
the Security Company, the keypad
displays:
Comm Fail
Destination 1
− If the system detects that the telephone
line is missing, or there is no dial tone,
the keypad displays:
Line 1 trouble.
Check dial tone.
− If the system has been programmed to
be serviced by your Security Company at
the service interval, the keypad displays:
Call for Service
− If there are no system troubles, the
keypad displays:
There are no
System troubles.
4. Press the [#] key to return to the normal display.
4.23 View Zone Trouble
Key Sequence: [#] + [4] + [8]
Description
Use this function to view which zones (if any) are in
trouble.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [4] + [8].
The keypad scrolls through all zones that are in
trouble.
Investigate the source of the trouble
condition. Correct the condition if possible
(for example, remove objects blocking a
sensor zone) or respond appropriately to the
trouble indicated.
If no zones are in trouble, the keypad displays:
There are no
zone troubles.
4. Press the [#] key to return to the normal display.
4.24 System Test
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [4] + [1]
Description
The System Test function allows you to make sure
that your system is operating correctly by testing the
system’s bell, strobe, battery and phone line. Your
Security Company programs which system
components are tested (for example, your system
may only be programmed to test the battery and the
bell).
I
c
a
n
t
e
s
t
:
System Bell
System Strobe
Battery
Phone Line
If any of these components fails to test,
contact your Security Company for
assistance. Be sure to contact your Security
Company before you begin a System Test.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [4] + [1].
The system starts to test. The bell output is
tested first and should sound for approximately 2
to 3 seconds. The display shows:
Testing Bell.
Listen for bell activation.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i
(175 Seiten)
(44 Seiten)
(8 Seiten)
(64 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern