Bosch DS7445i Betriebsanweisung PDF herunterladen (Seite 8)

PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD

Part II: Keypad User’s Guide

4.0 Using the DS7447i LCD (Text) Keypad

4.1 Silence Alarms

Description

When an alarm occurs, the alarm tone sounds and

the display shows the zone(s) in alarm.

If you enter your PIN before the abort timer

expires, the alarm report is aborted (non-fire

alarms only).

Procedure

1. The keypad displays the zone(s) in alarm:

Alarm Zn 4

Living Room

2. Enter your PIN to silence and turn the system off

(if it was turned on). An alarm report is sent to

your Security Company if the alarm is not

acknowledged in time.

The display continues to show the zone(s) that

caused the alarm:

Silenced alarms

listed below

Alarm Zn 8

Motion Detector

To remove

silenced alarms

from display,

hold #

3. Press and hold the [#] key to remove the alarm

messages from the keypad display. See “View

Alarm Memory” on page 18 to see which zones

caused the alarm.

4.2 Keypad Adjust

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [4] + [9]

Description

Use this function to adjust the keypad’s sounder

volume (non-alarm tones) and display brightness.

Procedure

1. Enter a valid user PIN.

2. Press [#] + [4] + [9].

3. To adjust the keypad’s sounder volume and non-

alarm tone volume, press and hold the [*] key,

and then press [1] to increase the volume or [4]

to decrease the volume.

4. To adjust the keypad’s display brightness, press

and hold the [*] key, and then press [3] to

increase the brightness or [6] to decrease the

brightness.

5. Press [#] to exit this function when all

adjustments have been made.

4.3 Turn the System Off

Entry Delay Time (to be filled in by your Security

Company):

You have __________ seconds to enter the premises

and turn the system off.

Description

Enter your PIN to turn the security system off. When

the system is on, you must enter through a

designated Entry door to prevent an alarm. Opening a

designated door (for example, Front Door) starts

Entry Delay. During Entry Delay time, the keypad

emits a double tone to remind you to turn the system

off. Enter your PIN before the Entry Delay time

expires to turn the system off.

If you enter through the wrong door or fail to

turn the system off before the Entry Delay

time expires, you may cause an alarm. If an

alarm occurs, silence the alarm by entering

your PIN and call your Security Company to

let them know that there is no emergency

situation.

Procedure

1. When the system is on, the Armed LED is on.

Depending on how the system was turned on, the

display shows either “All On”, “Perimeter On” or

“Partial On” across the second line.

2. Enter your PIN to turn the system off. Once the

system is off and there are no faulted zones, the

keypad displays a status message (as set by

your Security Company) across the second line.

Smiths Residence

OK for All On

4.4 Turn the System All On

Exit Delay Time (to be filled in by your Security

Company):

You have __________ seconds to exit the premises.

Key Sequence: [On] Key or [#] + [1]

Description

Use this function to turn on the entire system. Once

you press the [On] key or enter [#] + [1], the Exit

Delay timer starts its countdown.

Exit Delay length is programmed by your Security

Company.

When your system is ready to turn All On, it displays

“OK for All On.” This message means that all zones

are normal (for example, no doors or windows are

open and no one is standing in front of a motion

detector).

Smiths Residence

OK for All On

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch DS7445i Betriebsanweisung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i