Bosch DS7445i Betriebsanweisung Seite 34
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Page 34 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD
5.10 Force Arming the System
Force arming is not permitted for UL
applications.
I can perform this function.
I cannot perform this function.
Description
Force arming provides a method of overriding the
safety feature that prevents turning the system on
with a faulted zone(s).
5.10.1 Force Arming with Normal Exit Delay and Exit
Tone
Procedure
The entire system can be force armed (Force Armed
All On), or just the Perimeter can be force armed
(Force Arm Perimeter Only). For this procedure, you
will force arm your system All On with Zone 1 faulted.
Since Zone 1 is faulted, its LED is on.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10
11 12 13
14 15
16
Zone 1 Faulted - LED ON
Armed Perimeter
1. Enter a valid user PIN.
2. Press the [On] key or enter [#] + [1].
3. The Status LED flashes.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10 11 12 13
14 15
16
Armed Perimeter
Flashing Status LED
Zone 1 LED ON
4. Press the [On] key again (or enter [#] + [1] again).
5. The Armed LED turns on. The Zone 1 LED now
flashes as the Exit Delay countdown begins.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10
11 12 13
14 15
16
Flashing Zone 1 LED
PerimeterArmed
Armed LED ON
When the Exit Delay countdown ends, the Zone 1
LED turns off, but the Armed LED remains on.
6. To turn the system off, enter a valid PIN.
5.10.2 Force Arming with Doubled Exit Delay and No Exit
Tone
Procedure
Using the same scenario as before (turning the
system All On with Zone 1 faulted), you will now turn
your system All On with a doubled Exit Delay and no
Exit Tone.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10
11 12 13
14 15
16
Zone 1 Faulted - LED ON
Armed Perimeter
1. Enter a valid user PIN.
2. Press and hold the [On] key (or press the [#] key
and then press and hold the [1] key).
3. The Status LED flashes and the Zone 1 LED is
on, indicating that Zone 1 is faulted.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10 11 12 13
14 15
16
Armed Perimeter
Flashing Status LED
Zone 1 LED ON
4. Press the [On] key again (or enter [#] + [1]) - do
not press and hold.
5. The Armed LED turns on and Zone 1’s LED
flashes (indicating it is being bypassed) as the
system turns on.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10
11 12 13
14 15
16
Flashing Zone 1 LED
PerimeterArmed
Armed LED ON
There is no Exit tone and the Exit Delay time is
doubled. When Exit Delay expires, Zone 1’s LED
turns off. The Armed LED stays on.
6. To turn the system off, enter a valid PIN.
The system ‘forces’ the faulted zone on. As
long as it remains faulted, it does not provide
coverage. If it returns to normal before the
system is turned off, it provides coverage and
is capable of starting an alarm event. If a zone
becomes faulted after Exit Delay begins, the
keypad displays the faulted zone. If the zone
remains faulted at the end of Exit Delay, it
starts an alarm event.
The system can be Perimeter Only-force armed and
Partial On-forced armed. To force arm the Perimeter,
use the [Perimeter Only] key (or [#] + [2]) in the above
procedures. To force arm Partial On zones, use [#] +
[3] in the above procedures.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i
(175 Seiten)
(44 Seiten)
(8 Seiten)
(64 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern