Bosch DS7445i Betriebsanweisung Seite 31
- Seite / 54
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
DS7240/DS7220 User's Guide Copyright 2002 Detection Systems, Inc. P/N: 49211C Page 31
PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD
5.4 Turn the System All On
I can perform this function.
I cannot perform this function.
Exit Delay Time (to be filled in by your Security
Company):
You have __________ seconds to exit the premises
before the system turns on.
Key Sequence: [On] Key or [#] + [1]
Description
Use this function to turn the entire system on. Once
you press the [On] key, the Exit Delay timer starts its
countdown. Your Security Company programs the
length of Exit Delay to ensure you have adequate
time to exit.
You should leave the premises before the Exit
Delay time expires. Leaving after Exit Delay
expires starts an alarm event.
Procedure
1. Make sure that all zones are normal (not faulted).
If your system has a faulted zone, you should
return it to normal, or bypass it (see “Bypass
Zones” on page 35).
2. Enter a valid user PIN.
3. Press the [On] key (or enter [#] + [1]).
4. Exit Delay now begins. The Armed LED turns on.
You should leave at this time.
On
Status
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10 11 12
13 14
15 16
Armed LED ON
PerimeterArmed
Power
During Exit Delay, you may stop the system from
turning on by entering a valid PIN.
If you wish, you can turn the system All On with
No Exit Tone by pressing and holding the [1] key
(see page 33 for more details), or you may
bypass zones by pressing the [Bypass] key.
5. During the last 10 seconds of Exit Delay, the
keypad allows for a “last chance” response to
disarm the system. During this time, the keypad
emits a double tone every second. The system
then turns All On.
6. To turn the system off, enter a valid PIN.
5.5 Turn the System On Perimeter Only
I can perform this function.
I cannot perform this function.
Exit Delay Time (to be filled in by your Security
Company):
You have __________ seconds to exit the premises.
Key Sequence: [Perimeter Only] Key or [#] + [2]
Description
Perimeter Only turns on part of your system, leaving
the rest of the system turned off. Your Security
Company determines which zones are Perimeter Only
zones.
Once you press the [Perimeter Only] key, the Exit
Delay timer begins. You should leave the premises
before the Exit time expires. Leaving after Exit Delay
expires starts an alarm event.
Procedure
1. Make sure that zones configured for Perimeter
Only are normal (not faulted). If your system has
a faulted zone (door or window open), you can
either close it or bypass it (see “Bypass Zones”
on page 35).
2. Enter a valid user PIN.
3. Press the [Perimeter Only] key (or enter [#] + [2]).
4. The Perimeter and Armed LEDs turn on.
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
1 2 3 4 5 6 7 8
9 10 11 12
13 14
15 16
Armed and Periemter LEDs ON
Armed Perimeter
5. During the Exit Delay, you may stop the system
from turning on by entering your PIN.
6. During the last 10 seconds of Exit Delay, the
keypad allows for a “last chance” response to
disarm the system. During this time, the keypad
emits a double tone every second. The system
then turns on Perimeter Only. The Armed and
Perimeter LEDs remain turned on.
7. To turn the system off, enter a valid PIN.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i
(175 Seiten)
(44 Seiten)
(8 Seiten)
(64 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern