Bosch DS7445i Betriebsanweisung PDF herunterladen (Seite 13)

DS7240/DS7220 User's Guide Copyright  2002 Detection Systems, Inc. P/N: 49211C Page 13

PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD

4.11 View Faulted Zones

Key Sequence: [*]

Description

To correctly turn your system on, all doors and

windows must be in the normal (not faulted) condition.

See “What is a Faulted Zone?” on page 4 for a

definition of a faulted zone.

Use this function to locate faulted zones in your

system.

Procedure

1. Make sure that the system is turned off (Armed

LED is off).

2. Press the [*] key.

3. The keypad scrolls through all the faulted zones:

Zn 2 faulted,

Front Door

Zn 7 faulted,

Back Door

4. Return the faulted zones to the normal condition

(for example, close the front door). See “Bypass

Zones.”

5. Once the zones return to normal or are

bypassed, the system is ready to turn on.

4.12 Bypass Zones

I can perform this function.

I cannot perform this function.

Key Sequence: [Bypass] key or [#] + [0]

Description

Use this function to bypass one or more zones before

turning the system on. You can access a bypassed

zone when the system is turned on without activating

an alarm.

For example, your kitchen has just been painted and

you want to leave the windows open, but you also

want to turn your system on. Bypassing zones allows

the system to be on, but prevents it from monitoring

undesired areas.

Procedure

1. Make sure that the system is turned off (Armed

LED is off).

2. Enter a valid user PIN.

3. Press the [Bypass] key.

The keypad scrolls all zones that can be

bypassed:

Zn 1,

Front Door

To bypass Zn 1

Press 1 + *.

Zn 2,

Back Door

To bypass Zn 2

Press 2 + *.

4. Enter the Zone Number that you want to bypass

followed by the [*] key.

For example, if you want to bypass Zone 10,

enter [1] + [0] + [*]. Repeat this step to bypass all

desired zones.

If a zone is already bypassed, the keypad

displays:

Zn 3

Hallway

To unbypass 3

Press 3 + *.

To unbypass a zone, repeat the steps above for

the desired zone number.

5. Press [#] to exit this function.

If a zone is faulted, the keypad displays the zone

number. If the zone is bypassable, the keypad

prompts you to enter the zone number followed

by the [*] key. The display states if the zone can

or cannot be bypassed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Bosch DS7445i Betriebsanweisung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bosch DS7445i